Таймеры Omron H3YN-B

Omron H3YN-B

Компактные многофункциональные таймеры для установки в монтажную колодку

  • Доступна монтажная колодка с безвинтовыми клеммами типа «Push-in plus» (PYF-__-PU) — удобное подключение проводов.
  • Простая замена — сокращение времени обслуживания системы.
  • Компактный корпус шириной 15,5 мм — экономия места.
  • Большой прозрачный диск — простая установка времени срабатывания.

Заказная информация

Operating modes Control output Supply voltage Order code
Short-time range (0.1 s to 10 min) Long-time range (0.1 m to 10 h)
On-delay, Interval,
Flicker OFF-start, Flicker ON Start
DPDT 24 VAC H3YN-2-B AC24 H3YN-21-B AC24
24 VDC H3YN-2-B DC24 H3YN-21-B DC24
12 VDC H3YN-2-B DC12 H3YN-21-B DC12
100 to 120 VAC H3YN-2-B AC100-120 H3YN-21-B AC100-120
200 to 230 VAC H3YN-2-B AC200-230 H3YN-21-B AC200-230
4PDT 24 VAC H3YN-4-B AC24 H3YN-41-B AC24
24 VDC H3YN-4-B DC24 H3YN-41-B DC24
12 VDC H3YN-4-B DC12 H3YN-41-B DC12
100 to 120 VAC H3YN-4-B AC100-120 H3YN-41-B AC100-120
200 to 230 VAC H3YN-4-B AC200-230 H3YN-41-B AC200-230
4PDT, Twin Contact 24 VDC H3YN-4-Z-B DC24 H3YN-41-Z-B DC24

Характеристики

Item H3YN-2-B/H3YN-21-B H3YN-4-B/H3YN-41-B/H3YN-41-Z-B
Time ranges 0.1 s to 10 min (1 s, 10 s, 1 min, or 10 min max. selectable) 0.1 min to 10 h (1 min, 10 min, 1 h, or 10 h max. selectable)
Rated supply voltage 24, 100 to 120, 200 to 230 VAC ( 50/60 Hz), 12, 24 VDC
Pin type Plug-in
Operating mode ON-delay, interval, flicker OFF-start, or flicker-ON start selectable by DIP switch
Operating voltage range 85% to 110% of rated supply voltage (12 VDC: 90% to 110% of rated supply voltage)
Reset voltage 10% max. of rated supply voltage
Control outputs DPDT:
5 A at 250 VAC, resistive load (cosφ = 1)
The minimum applicable load is 1 mA at 5 VDC (P reference value).
Contact materials: Ag

4PDT:
3 A at 250 VAC, resistive load (cosφ = 1)
H3YN-4-B/-41-B series: The minimum applicable load is 1 mA at 1 VDC (P reference value)
H3YN-4-Z/-41-Z-B series: The minimum applicable load is 1 mA at 1 VDC (P reference value)
Contact materials: Au-clad + Ag-alloy
Accuracy of operating time ±1% FS max. (1 s range: ±1%±10 ms max.)
Setting error ±10% ±50 ms FS max.
Reset time Min. power-opening time: 0.1 s max. (including halfway reset)
Influence of voltage ±2% FS max.
Influence of temperature ±2% FS max.
Ambient temperature Operating: −10°C to 55°C (with no icing)
Storage: −25°C to 65°C (with no icing)
Degree of protection IP40 (Terminal screw sections are excluded.)
Size in mm (H x W x D) 28 x 21.5 x 52.6
Развернуть полное описание

В этой категории нет товаров