Таймеры Omron H3DK
Таймеры H3DK вводятся в качестве замены для давно представленных на рынке таймеров H3DE. Серия H3DK полностью совместима по производительности, функциональности и размерам с предыдущей серией.
- Безопасный для пальцев клеммный блок и невыпадающие винты согласно стандарту EN 50274
- Новая модель 12 В= представлена во всех подсемействах
- Новая модель звезда-треугольник с напряжением питания до 440 В~
- Устройства 24 и 48 В интегрированы в одной модели таймера ВЫКЛ-задержка
- Расширенный диапазон времени (Настройка времени от 0,1 с до 1200 ч)
Заказная информация
| Type | Supply voltage | Control output | Time setting range | Operating modes | Order code |
|---|---|---|---|---|---|
| Multi-functional standard timers |
12 VDC | SPDT | 0.1 s to 1200 h | ON-delay, flicker OFF start, flicker ON start, signal ON/OFF-delay, signal OFF-delay, interval, one-shot |
H3DK-M1A DC12 |
| DPDT | H3DK-M2A DC12 | ||||
| SPDT | ON-delay, flicker ON start, interval, one-shot | H3DK-S1A DC12 | |||
| DPDT | H3DK-S2A DC12 | ||||
| 24 to 240 VAC/VDC | SPDT | ON-delay, flicker OFF start, flicker ON start, signal ON/OFF-delay, signal OFF-delay, interval, one-shot |
H3DK-M1 AC/DC24-240 | ||
| DPDT | H3DK-M2 AC/DC24-240 | ||||
| SPDT | ON-delay, flicker ON start, interval, one-shot | H3DK-S1 AC/DC24-240 | |||
| DPDT | H3DK-S2 AC/DC24-240 | ||||
| Twin timer | 12 VDC | SPDT | 0.1 s to 12 h | Flicker OFF start, flicker ON start | H3DK-FA DC12 |
| 24 to 240 VAC/VDC | H3DK-F AC/DC24-240 | ||||
| Star-delta timer | 12 VDC | 2x SPDT | 1 to 120 s | Star-delta | H3DK-GA DC12 |
| 24 to 240 VAC/VDC | H3DK-G AC/DC24-240 | ||||
| 240 to 440 VAC | H3DK-GE AC/DC240-440 | ||||
| Power OFF-delay timer | 24 to 48 VAC/VDC | SPDT | 1 to 120 s | Signal OFF-delay | H3DK-HBL AC/DC24-48 |
| 0.1 to 12 s | H3DK-HBS AC/DC24-48 | ||||
| 100 to 120 VAC | 1 to 120 s | H3DK-HCL AC100-120V | |||
| 0.1 to 12 s | H3DK-HCS AC100-120V | ||||
| 200 to 240 VAC | 1 to 120 s | H3DK-HDL AC200-240V | |||
| 0.1 to 12 s | H3DK-HDS AC200-240V |
Характеристики
| Operating voltage range | 85 to 110% of rated supply voltage (90 to 110% for the 12 VDC models). |
| Power reset | Minimum power-off time: H3DK-M/S, H3DK-F: 0.1 s, H3DK-G: 0.5 s. (Not for H3DK-H) |
| Reset voltage | 10% of rated voltage. (Not for H3DK-H) |
| Voltage input (H3DK-M/-S) | 24 to 240 VAC/DC: H-level 20.4 to 264 VAC/VDC, L-level 0 to 2.4 VAC/VDC. |
| 12 VDC: H-level 10.8 to 13.2 VDC, L-level 0 to 1.2 VDC. | |
| Control output | Contact output: 5 A at 250 VAC with resistive load (cosφ = 1), 5 A at 24 VDC (30 VDC for -M/-S) with resistive load (not for H3DK-GE) |
| Ambient temperature | Operating: -20 to 55°C (with no icing), storage: -40 to 70°C (with no icing) |
| Accuracy of operating time | ±1% of FS max. (±1% ±10 ms max. at 1.2 s range) |
| Setting error | ±10% of FS ±0.05 s max. |
| Minimum input signal width | 50 ms (start input) (Only for H3DK-M/S) |
| Influence of voltage | ±0.5% of FS max. (±0.5% ±10 ms max. at 1.2 s range). For H3DK-G: ±0.5% of FS max. |
| Influence of temperature | ±2% of FS max. (±2% ±10 ms max. at 1.2s range). For H3DK-G: ±2% of FS max. |
| Life expectancy | Mechanical: 10 million operations min. (under no load at 1,800 operations/h) |
| Electrical: 100,000 operations min. (5 A at 250 VAC, resistive load at 360 operations/h) | |
| Degree of protection | IP30 (terminal block: IP20) |
| Terminal block | Clamps two 2.5 mm2 max. bar terminals without sleeves |
| Size in mm (HxWxD) | 79x22.5x100 |
