Системы технического зрения Omron FQ2
Посетите мини-сайт по системам технического зрения Omron FQ2
Omron FQ2 — система технического зрения с широкими функциональными возможностями в компактном корпусе. Фактически, комплект FQ2 это оптимальный набор инструментов, для построения системы контроля качества, включающий камеру, программное обеспечение, коммуникационные возможности и многое другое. Все необходимое для высокоточного и скоростного контроля качества выпускаемой продукции в одном компактном корпусе. Предыдущие версии систем технического зрения имели отдельный корпус для контроллера и для процессора обработки изображений, а в системе FQ2 эти модули объединены. В сенсорной части системы установлен сверхмощный источник света, способный обеспечивать работу широкоформатной камеры. Мощность источника света такова, что ее достаточно даже при использовании поляризационных фильтров. Фокусное расстояние линзы регулируемое и может быть настроено даже в случае нестандартного угла обзора и при необходимости установки камеры на определенном расстоянии. Линия со внешними выходами, посылающими сигналы об результатах детектирования, входная линия с сигналами, позволяющими дистанционно менять настройки камеры и линия с силовым питанием камеры объединены ы одном коннекторе, что позволяет значительно сократить время на подключение. Команды управления камерой (настройки), результаты инспектирования и измерений, а так же изображения с камеры могут быть переданы в ПЛК.
Камера имеет гибкие кабели, что позволяет устанавливать ее на подвижных частях установок. Степень защиты IP67, что дает возможность использовать камеру в сложных промышленных условиях. Коннектор позволяет подключать камеру просто, быстро и безошибочно.
Камера выполняет одновременно различные функции, в том числе детектирование и позиционирование. Вы можете комбинировать различные задачи детектирования которые выполняет один датчик машинного зрения. На примере выше показана возможность одного датчика контролировать разнообразные параметры. Датчик способен контролировать наличие микросхем в лотке, наличие повреждений на микросхеме, количество ножек и т.д.
На следующем примере камера выполняет определение положения детали, причем она способна точно указывать угол поворота детали, который может быть скорректирован роботом, получающим информацию от датчика технического зрения.
Распознавание символов. Даже если условия работы конвейера не идеальны, что влияет на качество печати символов, датчик технического зрения распознает символы безошибочно.
Теперь достаточно одного датчика Omron FQ2 что бы контролировать как корректность символов на этикетке, так и корректное расположение самой этикетки.
Камера способна работать с 15 различными типами кодов, начиная от этикеток с кодами и заканчивая кодами нанесенными на изделия.
Камера Omron FQ2 способна стабильно считывать коды вне зависимости от того на какой поверхности нанесены коды.
Информация для заказа
FQ2-S1 Series [Модель с одной функцией]
| Формат | Узкий формат | Стандартный формат | Широкий формат (длинные дистанции) | Широкий формат (короткие дистанции) | |
|---|---|---|---|---|---|
| Кол-во пикселей | 350,000 pixels | ||||
| Цвет | NPN | FQ2-S10010F | FQ2-S10050F | FQ2-S10100F | FQ2-S10100N |
| PNP | FQ2-S15010F | FQ2-S15050F | FQ2-S15100F | FQ2-S15100N | |
| Формат/Дистанция установки | См. рисунок 1 | См. рисунок 2 | См. рисунок 3 | См. рисунок 4 | |
FQ2-S2 Series [Стандартная]
| Формат | Узкий формат | Стандартный формат | Широкий формат (длинные дистанции) | Широкий формат (короткие дистанции) | |
|---|---|---|---|---|---|
| Кол-во пикселей | 350,000 pixels | ||||
| Цвет | NPN | FQ2-S20010F | FQ2-S20050F | FQ2-S20100F | FQ2-S20100N |
| PNP | FQ2-S25010F | FQ2-S25050F | FQ2S25100F | FQ2-S25100N | |
| Формат/Дистанция установки | См.рисунок 1 | См. рисунок 2 | См. рисунок 3 | См.рисунок 4 | |
FQ2-S3 Series [Высокого разрешения]
| Формат | Узкий формат | Стандартный формат | |
|---|---|---|---|
| Кол-во пикселей | 760,000 pixels | ||
| Цветная | NPN | FQ2-S30010F-08 | FQ2-S30050F-08 |
| PNP | FQ2-S35010F-08 | FQ2-S35050F08 | |
| Монохромная | NPN | FQ2-S30010F-08M | FQ2-S30050F-08M |
| PIMP | FQ2-S35010F-08M | FQ2-S35050F-08M | |
| Формат/Дистанция установки | См.рисунок 5 | См. рисунок 6 | |
| Формат | Широкий формат (длинные дистанции) | Широкий формат (короткие дистанции) | C-mount | |
|---|---|---|---|---|
| Кол-во пикселей | 760,000 pixels | 1.3 million pixels | ||
| Цветная | NPN | FQ2-S30100F-08 | FQ2-S30100N08 | FQ2-S30-13 |
| PNP | FQ2-S350100F-08 | FQ2-S35100N-08 | FQ2S3513 | |
| Монохромная | NPN | FQ2-S30100F-08M | FQ2-S30100N-08M | FQ2-S3013M |
| PNP | FQ2-S35100F-08M | FQ2-S35100N08M | FQ2-S35-13M | |
| Формат/Дистанция установки | См.рисунок 7 | См.рисунок 8 | См. оптическую диаграмму в каталоге. | |
FQ2-S4 Series
Standard Type
| Field of vision | Narrow View | Standard View | Wide View (Long-distance) | Wide View (Short-distance) | |
|---|---|---|---|---|---|
| Number of pixels | 350,000 pixels | ||||
| Color | NPN | FQ2-S40010F | FQ2-S40050F | FQ2-S40100F | FQ2-S40100N |
| PNP | FQ2-S45010F | FQ2-S45050F | FQ2-S45100F | FQ2-S45100N | |
| Monochrome | NPN | FQ2-S40010F-M | FQ2-S40050F-M | FQ2-S40100F-M | FQ2-S40100N-M |
| PNP | FQ2-S45010F-M | FQ2-S45050F-M | FQ2-S45100F-M | FQ2-S45100N-M | |
High-resolution Type
| Field of vision | Narrow View | Standard View | Wide View (Long-distance) | Wide View (Short-distance) | C-mount | |
|---|---|---|---|---|---|---|
| Number of pixels | 760,000 pixels | 1.3 million pixels | ||||
| Color | NPN | FQ2-S40010F-08 | FQ2-S40050F-08 | FQ2-S40100F-08 | FQ2-S40100N-08 | FQ2-S40-13 |
| PNP | FQ2-S45010F-08 | FQ2-S45050F-08 | FQ2-S45100F-08 | FQ2-S45100N-08 | FQ2-S45-13 | |
| Monochrome | NPN | FQ2-S40010F-08M | FQ2-S40050F-08M | FQ2-S40100F-08M | FQ2-S40100N-08M | FQ2-S40-13M |
| PNP | FQ2-S45010F-08M | FQ2-S45050F-08M | FQ2-S45100F-08M | FQ2-S45100N-08M | FQ2-S45-13M | |
ID Model
FQ2-CH Series [Optical Character Recognition Sensor]
| Field of vision | Narrow View | Standard View | Wide View (Long-distance) | Wide View (Short-distance) | |
|---|---|---|---|---|---|
| Number of pixels | 350,000 pixels | ||||
| Monochrome | NPN | FQ2-CH10010F-M | FQ2-CH10050F-M | FQ2-CH10100F-M | FQ2-CH10100N-M |
| PNP | FQ2-CH15010F-M | FQ2-CH15050F-M | FQ2-CH15100F-M | FQ2-CH15100N-M | |
FQ-CR1 Series [Multi Code Reader]
| Field of vision | Narrow View | Standard View | Wide View (Long-distance) | Wide View (Short-distance) | |
|---|---|---|---|---|---|
| Number of pixels | 350,000 pixels | ||||
| Monochrome | NPN | FQ-CR10010F-M | FQ-CR10050F-M | FQ-CR10100F-M | FQ-CR10100N-M |
| PNP | FQ-CR15010F-M | FQ-CR15050F-M | FQ-CR15100F-M | FQ-CR15100N-M | |
FQ-CR2 Series [2D Code Reader]
| Field of vision | Narrow View | Standard View | Wide View (Long-distance) | Wide View (Short-distance) | |
|---|---|---|---|---|---|
| Number of pixels | 350,000 pixels | ||||
| Monochrome | NPN | FQ-CR20010F-M | FQ-CR20050F-M | FQ-CR20100F-M | FQ-CR20100N-M |
| PNP | FQ-CR25010F-M | FQ-CR25050F-M | FQ-CR25100F-M | FQ-CR25100N-M | |
Ratings and Performance
Sensor
Inspection Model FQ2-S1/S2/S3 Series
| Item | Single-function type | Standard type | High-resolution type | ||||
|---|---|---|---|---|---|---|---|
| Model | NPN | FQ2-S10____ | FQ2-S20____ | FQ2-S30____ -08 | FQ2-S30____ -08M | FQ2-S30-13 | FQ2-S30-13M |
| PNP | FQ2-S15____ | FQ2-S25____ | FQ2-S35____ -08 | FQ2-S35____ -08M | FQ2-S35-13 | FQ2-S35-13M | |
| Field of view | Refer to Ordering Information on p.19. (Tolerance (field of vision): ±10% max.) | Select a lens according to the field of vision and installation distance | |||||
| Installation distance | |||||||
| Main functions | Inspection items | Search, shape search II, sensitive search, area, color data, edge position, edge pitch, edge width, and labeling | |||||
| Number of simultaneous measurements | 1 | 32 | |||||
| Position compensation | Supported (360? Model position compensation, Edge position compensation) | ||||||
| Number of registered scenes | 8 | 32 | |||||
| Calibration | Supported | ||||||
| Image input | Image processing method | Real color | Monochrome | Real color | Monochrome | ||
| Image filter | High dynamic range (HDR), image adjustment (Color Gray Filter, Weak smoothing, Strong smoothing, Dilate, Erosion, Median, Extract edges, Extract horizontal edges, Extract vertical edges, Enhance edges, Background suppression), polarizing filter (attachment), and white balance (Sensors with Color Cameras only) | ||||||
| Image elements | 1/3-inch color CMOS | 1/2-inch color CMOS | 1/2-inch Monochrome CMOS | 1/2-inch color CMOS | 1/2-inch Monochrome CMOS | ||
| Shutter | Built-in lighting ON: 1/250 to 1/50,000 Built-in lighting OFF: 1/1 to 1/50,000 |
Built-in lighting ON: 1/250 to 1/60,000 Built-in lighting OFF: 1/1 to 1/60,000 |
1/1 to 1/60,000 | ||||
| Processing resolution | 752 x480 | 928 x828 | 1,280 x1,024 | ||||
| Partial input function | Supported horizontally only. | Supported horizontally and vertically | |||||
| Lens mounts | - | C-mount | |||||
| Lighting | Lighting method | Pulse | - | ||||
| Lighting color | White | - | |||||
| Data logging | Measurement data | In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.) | |||||
| Images | In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.) | ||||||
| Auxiliary function | Math (arithmetic, calculation functions, trigonometric functions, and logic functions) | ||||||
| Measurement trigger | External trigger (single or continuous) Communications trigger (Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET) |
||||||
| I/O specifications | Input signals | 7 signals Single measurement input (TRIG) Control command input (IN0 to IN5) |
|||||
| Output signals | 3 signals Control output (BUSY) Overall judgement output (OR) Error output (ERROR) The assignments of the three output signals (OUT0 to OUT2) can be changed to the individual judgements of the inspection items, the image input ready output (READY), or the external lighting timing output (STGOUT). |
||||||
| Ethernet specifications | 100Base-TX/10Base-T | ||||||
| Communications | Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET | ||||||
| I/O expansion | - | - | Possible by connecting FQ-SDU1_ Sensor Data Unit. 11 inputs and 24 outputs | ||||
| RS-232C | - | - | Possible by connecting FQ-SDU2_ Sensor Data Unit. 8 inputs and 7 outputs | ||||
| Ratings | Power supply voltage | 21.6 to 26.4 VDC (including ripple) | |||||
| Current consumption | 2.4 A max. | 0.3 A max. | |||||
| Environmental immunity | Ambient temperature range | Operating: 0 to 50?C Storage: -25 to 65?C (with no icing or condensation) |
Operating: 0 to 40?C Storage: -25 to 65?C (with no icing or condensation) |
||||
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) | ||||||
| Ambient atmosphere | No corrosive gas | ||||||
| Vibration resistance (destruction) | 10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions 8 min each, 10 times |
||||||
| Shock resistance (destruction) | 150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) | ||||||
| Degree of protection | IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted or connector cap is removed.) |
IEC 60529 IP40 | |||||
| Materials | Sensor: PBT, PC, SUS Mounting Bracket: PBT Polarizing Filter Attachment: PBT, PC Ethernet connector: Oil-resistance vinyl compound I/O connector: Lead-free heat-resistant PVC |
Cover: Zinc-plated steel, Thickness: 0.6 mm Case: Aluminum diecast alloy (ADC-12) Mounting base: Polycarbonate ABS |
|||||
| Weight | Narrow View/Standard View:Approx.160 g Wide View: Approx.150 g |
Approx. 160 g without base, Approx. 185 g with base |
|||||
| Accessories included with sensor | Mounting Bracket (FQ-XL) (1) Polarizing Filter Attachment (FQ-XF1) (1) Instruction Manual, Quick Startup Guide Member Registration Sheet, Warning Label |
Mounting Base (FQ-XLC) (1) Mounting Screw (M3 x8mm) (4) Instruction Manual, Quick Startup Guide Member Registration Sheet |
|||||
| LED class | Class 2(Applicable standards: IEC 60825-1:1993 +A1:1997 +A2:2001, EN 60825-1:1994 +A1:2002 +A2:2001, and JIS C 6802:2005) |
- | |||||
| Applicable standards | EN standard EN 61326 and EC Directive No.2004/104/EC | EN 61326-1:2006 and IEC 61010-1 | |||||
Inspection/ID Model FQ2-S4 Series
| Item | Inspection/ID Model | ||||||
|---|---|---|---|---|---|---|---|
| Model | NPN | FQ2-S40____ | FQ2-S40____-M | FQ2-S40____-08 | FQ2-S40____-08M | FQ2-S40____-13 | FQ2-S40____-13M |
| PNP | FQ2-S45____ | FQ2-S45____-M | FQ2-S45____-08 | FQ2-S45____-08M | FQ2-S45____-13 | FQ2-S45____-13M | |
| Field of view | Refer to Ordering Information on p.19. (Tolerance (field of vision): ±10% max.) | Select a lens according to the field of vision and installation distance. | |||||
| Installation distance | |||||||
| Main functions | Inspection items | Search, shape search II, sensitive search, area, color data, edge position, edge pitch, edge width, labeling, OCR | |||||
| Number of simultaneous measurements | 32 | ||||||
| Position compensation | Supported (360? Model position compensation, Edge position compensation) | ||||||
| Number of registered scenes | 32 | ||||||
| Calibration | Supported | ||||||
| Retry function | Normal retry, Exposure retry, Scene retry, Trigger retry | ||||||
| Image input | Image processing method | Real color | Monochrome | Real color | Monochrome | Real color | Monochrome |
| Image filter | High dynamic range (HDR), image adjustment (Color Gray Filter, Weak smoothing, Strong smoothing, Dilate, Erosion, Median, Extract edges, Extract horizontal edges, Extract vertical edges, Enhance edges, Background suppression), polarizing filter (attachment), and white balance (Sensors with Color Cameras only) | ||||||
| Image elements | 1/3-inch color CMOS | 1/3-inch Monochrome CMOS | 1/2-inch color CMOS | 1/2-inch Monochrome CMOS | 1/2-inch color CMOS | 1/2-inch Monochrome CMOS | |
| Shutter | Built-in lighting ON: 1/250 to 1/50,000 Built-in lighting OFF: 1/1 to 1/50,000 |
Built-in lighting ON: 1/250 to 1/60,000 Built-in lighting OFF: 1/1 to 1/60,000 |
1/1 to 1/60,000 | ||||
| Processing resolution | 752 x480 | 928 x828 | 1,280 x1,024 | ||||
| Partial input function | Supported horizontally only. | Supported horizontally and vertically | |||||
| Lens mounts | - | C-mount | |||||
| Lighting | Lighting method | Pulse | - | ||||
| Lighting color | White | - | |||||
| Data logging | Measurement data | In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.) | |||||
| Images | In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.) | ||||||
| Auxiliary function | Math (arithmetic, calculation functions, trigonometric functions, and logic functions) | ||||||
| Measurement trigger | External trigger (single or continuous) Communications trigger (Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link , or PROFINET) |
||||||
| I/O specifications | Input signals | 7 signals Single measurement input (TRIG) Control command input (IN0 to IN5) |
|||||
| Output signals | 3 signals Control output (BUSY) Overall judgement output (OR) Error output (ERROR) The assignments of the three output signals (OUT0 to OUT2) can be changed to the individual judgements of the inspection items, the image input ready output (READY), or the external lighting timing output (STGOUT). |
||||||
| Ethernet specifications | 100Base-TX/10Base-T | ||||||
| Communications | Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET | ||||||
| I/O expansion | Possible by connecting FQ-SDU1_ Sensor Data Unit. 11 inputs and 24 outputs | ||||||
| RS-232C | Possible by connecting FQ-SDU2_ Sensor Data Unit. 8 inputs and 7 outputs | ||||||
| Ratings | Power supply voltage |
21.6 to 26.4 VDC (including ripple) | |||||
| Current consumption | 2.4 A max. | 0.3 A max. | |||||
| Environmental immunity | Ambient temperature range | Operating: 0 to 40?C Storage: -25 to 65?C (with no icing or condensation) |
|||||
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) | ||||||
| Ambient atmosphere | No corrosive gas | ||||||
| Vibration resistance (destruction) | 10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions 8 min each, 10 times |
||||||
| Shock resistance (destruction) | 150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) | ||||||
| Degree of protection | IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted or connector cap is removed.) |
IEC 60529 IP40 | |||||
| Materials | Sensor: PBT, PC, SUS Mounting Bracket: PBT Polarizing Filter Attachment: PBT, PC Ethernet connector: Oil-resistance vinyl compound I/O connector: Lead-free heat-resistant PVC |
Cover: Zinc-plated steel, Thickness: 0.6 mm Case: Aluminum diecast alloy (ADC-12) Mounting base: Polycarbonate ABS |
|||||
| Weight | Narrow View/Standard View:Approx.160 g Wide View:Approx.150 g |
Approx. 160 g without base, Approx. 185 g with base |
|||||
| Accessories included with sensor | Mounting Bracket (FQ-XL)(1) Polarizing Filter Attachment (FQ-XF1) (1) Instruction Manual, Quick Startup Guide Member Registration Sheet, Warning Label |
Mounting Base (FQ-XLC) (1) Mounting Screw (M3 x8mm)(4) Instruction Manual, Quick Startup Guide Member Registration Sheet |
|||||
| LED class | Class 2(Applicable standards: IEC 60825-1:1993 +A1:1997 +A2:2001, EN 60825-1:1994 +A1:2002 +A2:2001, and JIS C 6802:2005) |
- | |||||
| Applicable standards | EN 61326-1:2006 and IEC 61010-1 | ||||||
ID Model FQ2-CH, FQ-CR1/CR2 Series
| Item | Optical Character Recognition Sensor | Multi Code Reader | 2D Code Reader | |
|---|---|---|---|---|
| Model | NPN | FQ2-CH10____ -M | FQ-CR10____ -M | FQ-CR20____ -M |
| PNP | FQ2-CH15____ -M | FQ-CR15____ -M | FQ-CR25____ -M | |
| Field of view | (Tolerance (field of vision):±10% max.) | |||
| Installation distance | ||||
| Main functions | Inspection items | OCR_Alphabet A to Z_Number 0 to 9_Symbol ' - . : /Model dictionary | 2D Code (Data Matrix(EC200), QR Code, MicroQR Code, PDF417, MicroPDF417, GS1-Data Matrix) | 2D Code (Data Matrix(EC200), QR Code) |
| Bar Code (JAN/EAN/UPC, Code39, Codabar (NW-7), ITF (Interleaved 2 of 5), Code 93, Code128/GS1-128, GS1 DataBar* (Truncated, Stacked, Omnidirectional, Stacked Omnidirectional, Limited, Expanded, Expanded Stacked), Pharmacode, GS1-128 Composite Code (CC-A, CC-B, CC-C) | ||||
| Image filter | Weak smoothing, Strong smoothing, Dilate, Erosion, Median, Extract edges, Extract horizontal edges, Extract vertical edges, Enhance edges, Background suppression | None | Filter function (Smooth, Dilate, Erosion, Median), Code Error Correction Position Display | |
| Verification function | Supported | Supported | None | |
| Retry function | Normal retry, Exposure retry, Scene retry, Trigger retry | |||
| Number of simultaneous measurements | 32 | |||
| Position compensation | Supported (360? Model position compensation, Edge position compensation) | None | ||
| Number of registered scenes | 32 | |||
| Image input | Image processing method | Monochrome | ||
| Image filter | High dynamic range (HDR) and polarizing filter (attachment) | |||
| Image elements | 1/3-inch Monochrome CMOS | |||
| Shutter | Built-in lighting ON: 1/250 to 1/50,000 Built-in lighting OFF: 1/1 to 1/50,000 |
1/250 to 1/30,000 | 1/250 to 1/32,258 | |
| Processing resolution | 752 x480 | |||
| Partial input function | Supported horizontally only. | |||
| Lighting | Lighting method | Pulse | ||
| Lighting color | White | |||
| Data logging | Measurement data | In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.) | ||
| Images | In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.) | |||
| Auxiliary function | Math (arithmetic, calculation functions, trigonometric functions, and logic functions) | |||
| Measurement trigger | External trigger (single or continuous) Communications trigger (Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET) |
External trigger (single or continuous) | ||
| I/O specifications | Input signals | 7 signals Single measurement input (TRIG) Control command input (IN0 to IN5) |
||
| Output signals | 3 signals Control output (BUSY) Overall judgement output (OR) Error output (ERROR) The assignments of the three output signals (OUT0 to OUT2) can be changed to the individual judgements of the inspection items, the image input ready output (READY), or the external lighting timing output (STGOUT). |
3 signals Control output (BUSY) Overall judgement output (OR) Error output (ERROR) Note: The three output signals can be allocated for the judgements of individual inspection items. |
||
| Ethernet specifications | 100Base-TX/10Base-T | |||
| Communications | Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET |
Ethernet TCP no-protocol | ||
| I/O expansion | Possible by connecting FQ-SDU1_ Sensor Data Unit. 11 inputs and 24 outputs | - | ||
| RS-232C | Possible by connecting FQ-SDU2_ Sensor Data Unit. 8 inputs and 7 outputs | - | ||
| Ratings | Power supply voltage | 21.6 to 26.4 VDC (including ripple) | ||
| Current consumption | 2.4 A max. | |||
| Environmental immunity | Ambient temperature range | Operating: 0 to 40?C, Storage: -25 to 65?C (with no icing or condensation) |
Operating: 0 to 50?C, Storage: -25 to 65?C (with no icing or condensation) |
|
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) | |||
| Ambient atmosphere | No corrosive gas | |||
| Vibration resistance (destruction) | 10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions 8 min each, 10 times |
|||
| Shock resistance (destruction) | 150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) | |||
| Degree of protection | IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted or connector cap is removed.) | |||
| Materials | Sensor: PBT, PC, SUS, Mounting Bracket: PBT, Polarizing Filter Attachment: PBT, PC Ethernet connector: Oil-resistance vinyl compound, I/O connector: Lead-free heat-resistant PVC |
|||
| Weight | Narrow View/Standard View: Approx.160 g Wide View: Approx. 150 g | |||
| Accessories included with sensor | Mounting Bracket (FQ-XL)(1), Polarizing Filter Attachment (FQ-XF1) (1), Instruction Manual, Quick Startup Guide, Member Registration Sheet, Warning Label | |||
| LED class | Class 2(Applicable standards: IEC 60825-1:1993 +A1:1997 +A2:2001,EN 60825-1:1994 +A1:2002 +A2:2001, and JIS C 6802:2005) | |||
| Applicable standards | EN 61326-1:2006 and IEC61010-1 | |||
Touch Finder
| Item | Type | Model with DC power supply | Model with AC/DC/battery power supply | |
|---|---|---|---|---|
| Model | FQ2-D30 | FQ2-D31 | ||
| Number of connectable Sensor | Number of sensors that can be recognized (switched): 32 max. number or sensor that can displayed on monitor: 8 max. | |||
| Main functions | Types of measurement displays | Last result display, Last NG display, trend monitor, histograms | ||
| Types of display images | Through, frozen, zoom-in, and zoom-out images | |||
| Data logging | Measurement results, measured images | |||
| Menu language | English, German, French, Italian, Spanish, Traditional Chinese, Simplified Chinese, Korean, Japanese | |||
| Indications | LCD | Display device | 3.5-inch TFT color LCD | |
| Pixels | 320 x240 | |||
| Display colors | 16.7 million | |||
| Backlight | Life expectancy | 50,000 hours at 25?C | ||
| Brightness adjustment | Provided | |||
| Screen saver | Provided | |||
| Operation interface | Touch screen | Method | Resistance film | |
| Life expectancy | 1,000,000 touch operations | |||
| External interface | Ethernet | 100BASE-TX/10BASE-T | ||
| SD card | SDHC-compliant, Class 4 or higher recommended | |||
| Ratings | Power supply voltage | DC power connection: 21.6 to 26.4 VDC (including ripple) | DC power connection: 21.6 to 26.4 VDC (including ripple) AC adapter (manufactured by Sino-American Japan Co., Ltd) connection: 100 to 240 VAC, 50/60 Hz Battery connection: FQ-BAT1 Battery (1cell, 3.7 V) |
|
| Continuous operation on Battery | - | 1.5 h | ||
| Power consumption | DC power connection: 0.2 A max. | DC power connection: 0.2 A max. Charging battery: 0.4 A max. |
||
| Environmental immunity | Ambient temperature range | Operating: 0 to 50?C Storage: -25 to 65?C (with no icing or condensation) |
Operating: 0 to 50?C when mounted to DIN Track or panel Operation on Battery: 0 to 40?C: -25 to 65?C (with no icing or condensation) |
|
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) | |||
| Ambient atmosphere | No corrosive gas | |||
| Vibration resistance (destruction) | 10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions 8 min each, 10 times | |||
| Shock resistance (destruction) | 150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) | |||
| Degree of protection | IEC 60529 IP20 (when SD card cover, connector cap, or harness is attached) | |||
| Weight | Approx. 270 g (without Battery and hand strap attached) | |||
| Materials | Case: ABS | |||
| Accessories included with Touch Finder | Touch Pen (FQ-XT), Instruction Manual | |||
Sensor Data Units (FQ2-S3/S4/CH only)
| Item | Parallel Interface | RS-232C Interface | ||
|---|---|---|---|---|
| Model | NPN | FQ-SDU10 | FQ-SDU20 | |
| PNP | FQ-SDU15 | FQ-SDU25 | ||
| I/O specifications | Parallel I/O | Connector 1 | 16 outputs (D0 to D15) | 6 inputs (IN0 to IN5) |
| Connector 2 | 11 inputs (TRIG, RESET, IN0 to IN7, and DSA) 8 outputs (GATE, ACK, RUN, BUSY, OR, ERROR, STGOUT, and SHTOUT) |
2 inputs (TRIG and RESET) 7 outputs (ACK, RUN, BUSY, OR, ERROR, STGOUT, and SHTOUT) |
||
| RS-232C | - | 1 channel, 115,200 bps max. | ||
| Sensor interface | FQ2-S3 connected with FQ-WU___: OMRON interface *Number of connected Sensors: 1 |
|||
| Ratings | Power supply voltage | 21.6 to 26.4 VDC (including ripple) | ||
| Insulation resistance | Between all DC external terminals and case: 0.5 MΩ min (at 250 VDC) | |||
| Current consumption | 2.5 A max.: FQ2-S______
-___ and FQ-SDU__
0.4 A max.: FQ2-S3_-___ and FQ-SDU__ 0.1 A max.: FQ-SDU__ only |
|||
| Environmental immunity | Ambient temperature range | Operating: 0 to 50?C, Storage: -20 to 65?C (with no icing or condensation) | ||
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) | |||
| Ambient atmosphere | No corrosive gas | |||
| Vibration resistance (destruction) | 10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions, 8 min each, 10 times | |||
| Shock resistance (destruction) | 150 m/s? 3 times each in 6 directions (up, down, right, left, forward, and backward) | |||
| Degree of protection | IEC 60529 IP20 | |||
| Materials | Case: PC + ABS, PC | |||
| Weight | Approx. 150 g | |||
| Accessories included with Sensor Data Unit | Instruction Manual | |||
Battery
| Item Model | FQ-BAT1 |
|---|---|
| Battery type | Secondary lithium ion battery |
| Nominal capacity | 1,800 mAh |
| Rated voltage | 3.7 V |
| Ambient temperature range | Operating: 0 to 40?C Storage: -25 to 65?C (with no icing or condensation) |
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) |
| Charging method | Charged in Touch Finder (FQ2-D31). AC adapter (FQ-AC_) is required. |
| Charging time | 2 h |
| Usage time | 1.5 h |
| Battery backup life | 300 charging cycles |
| Weight | 50 g max. |
