Бесконтактный дверной выключатель Omron F3S-TGR-N_R
Бесконтактный герконовый дверной выключатель служит для контроля положения защитного ограждения. Для пищевых производств с повышенными требованиями к гигиене предлагаются модели в корпусе из нержавеющей стали.
- Изготовлен с использованием геркона
- Возможность последовательного подключения до 6 выключателей
- Работает со всеми котроллерами систем безопасности Omron
- Возможность работы даже позади конструкций из нержавеющей стали
- Отсутствие контакта - отсутствие износа - отсутствие мелких частиц
- Компенсация допустимых механических отклонений
- Подходит для задач очистки/стерилизации (CIP/SIP), а также для очистки под высоким давлением по IP69K (модели с встроенным кабелем)
- Соответствует требованиям безопасности до PLe по EN ISO13849-1
Заказная информация
Polyester housing
| Type | Cable connection | Contact configuration | Order code |
|---|---|---|---|
Elongated sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NLPR-21-05 |
| 10 m pre-wired | F3S-TGR-NLPR-21-10 | ||
| M12, 8-pin | F3S-TGR-NLPR-21-M1J8 | ||
Small sensors |
5 m pre-wired | F3S-TGR-NSPR-21-05 | |
| 10 m pre-wired | F3S-TGR-NSPR-21-10 | ||
| M12, 8-pin | F3S-TGR-NSPR-21-M1J8 | ||
Miniature sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NMPR-21-05 |
| 10 m pre-wired | F3S-TGR-NMPR-21-10 | ||
| M12, 8-pin | F3S-TGR-NMPR-21-M1J8 | ||
Barrel sensors |
5 m pre-wired | F3S-TGR-NBPR-21-05 | |
| 10 m pre-wired | F3S-TGR-NBPR-21-10 | ||
| M12, 8-pin | F3S-TGR-NBPR-21-M1J8 |
Stainless steel housing
| Type | Cable connection | Contact configuration | Order code |
|---|---|---|---|
Elongated sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NLMR-21-05 |
| 10 m pre-wired | F3S-TGR-NLMR-21-10 | ||
| M12, 8-pin | F3S-TGR-NLMR-21-M1J8 | ||
Small sensors |
5 m pre-wired | F3S-TGR-NSMR-21-05 | |
| 10 m pre-wired | F3S-TGR-NSMR-21-10 | ||
| M12, 8-pin | F3S-TGR-NSMR-21-M1J8 | ||
Barrel sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NBMR-21-05 |
| 10 m pre-wired | F3S-TGR-NBMR-21-10 | ||
| M12, 8-pin | F3S-TGR-NBMR-21-M1J8 |
Hygienic and food types
| Type | Cable connection | Contact configuration | Order code |
|---|---|---|---|
Small sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NSHR-21-05 |
| 10 m pre-wired | F3S-TGR-NSHR-21-10 | ||
| M12, 8-pin | F3S-TGR-NSHR-21-M1J8 | ||
Small sensors (Special food type) |
5 m pre-wired | F3S-TGR-NSFR-21-05 | |
| 10 m pre-wired | F3S-TGR-NSFR-21-10 | ||
| M12, 8-pin | F3S-TGR-NSFR-21-M1J8 | ||
Miniature sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NMHR-21-05 |
| 10 m pre-wired | F3S-TGR-NMHR-21-10 | ||
| M12, 8-pin | F3S-TGR-NMHR-21-M1J8 |
Характеристики
Mechanical data
| Item | Model | Plastic housing | Stainless steel housing |
|---|---|---|---|
| Serial switching | up to 6 pcs. | ||
| Operating distance | OFF - ON (Sao) | 10 mm Close | |
| ON - OFF (Sar) | 20 mm* Open | ||
| Actuator approach speed | Min. Max. |
4 mm/s 1,000 mm/s |
|
| Operating temperature | - | -25 to 80°C | -25 to 105°C |
| Enclosure protection | Flying lead M12 connector |
IP69K IP67 |
|
| Material cable | Flying lead | PVC, Ø 6 mm o.d. | |
| M12 connector | 250 mm, PVC, Ø 6 mm o.d. | ||
| Material housing | - | Black polyester | Stainless steel 316 |
Electrical data
| Item | Model | Plastic housing | Stainless steel housing |
|---|---|---|---|
| Indicator LED | none | ||
| Contact release time | Max. | 2 ms | |
| Initial contact resistance | Max. | 500 mΩ | |
| Switching current | Min. | 1 mA, 10 VDC | |
Approved standards
| EN standards certified by TÜV Rheinland |
|---|
| EN ISO13849-1 |
| EN 60204-1 |
| EN 62061 |
| EN/IEC 60947-5-3 |
| UL 508, CSA C22.2 |
| BS 5304 |
| EN 1088-1 conformance |
Аксессуары
| Order code | ||
|---|---|---|
| Cables 8-pin | 2 m | Y92E-M12PURSH8S2M-L |
| 5 m | Y92E-M12PURSH8S5M-L | |
| 10 m | Y92E-M12PURSH8S10M-L | |
| 25 m | Y92E-M12PURSH8S25M-L | |
| Actuators | for F3S-TGR-NLPR | F39-TGR-NLPR-A |
| for F3S-TGR-NSPR | F39-TGR-NSPR-A | |
| for F3S-TGR-NMPR | F39-TGR-NMPR-A | |
| for F3S-TGR-NCPR | F39-TGR-NCPR-A | |
| for F3S-TGR-NWPR | F39-TGR-NWPR-A | |
| for F3S-TGR-NBPR | F39-TGR-NBPR-A | |
| for F3S-TGR-NLMR | F39-TGR-NLMR-A | |
| for F3S-TGR-NSMR | F39-TGR-NSMR-A | |
| for F3S-TGR-NBMR | F39-TGR-NBMR-A | |
| for F3S-TGR-NSHR | F39-TGR-NSHR-A | |
| for F3S-TGR-NSFR | F39-TGR-NSFR-A | |
| for F3S-TGR-NMHR | F39-TGR-NMHR-A | |
| Mounting screws | Set of Torx safety screws (M4, 4 x 30 mm, 4 x 20 mm, 4 x 10 mm; incl. washers and Torx bit) |
F39-TGR-N-SCREWS |
| Spacer (8 mm, Set of 2pcs.) | for elongated sensors | F39-TGR-NLR-SPACER |
| for small sensors | F39-TGR-NSR-SPACER | |
| for miniature sensors | F39-TGR-NMR-SPACER | |
| for long sensors | F39-TGR-NLR-SPACER | |
| for wide sensors | F39-TGR-NWR-SPACER | |
