Фильтры товаров Фильтры товаров

Измерительные датчики Omron ZG2

Omron ZG2

ZG2 служит для точного измерения формы объектов со сложным рельефом поверхности, выполненных из материалов, затрудняющих измерение. Простой в работе, интуитивно понятный интерфейс пользователя упрощает монтаж, настройку и эксплуатацию прибора. Встроенный ЖК-экран отображает результаты измерения в реальном времени.

  • Простота эксплуатации: интуитивно понятный интерфейс пользователя
  • Информативность: встроенный ЖК-экран для настройки и мгновенного отображения профиля
  • Универсальность: 18 режимов измерения
  • Точность: разрешение 5 мкм (3 мм / 631 точек)
  • Широкий обзор: до 70 мм

Заказная информация

Sensor heads

Optical method Sensing distance Resolution Order code
Height direction Width direction Height direction Width direction
Diffuse reflective 210±48 mm 70 mm 6 µm 111 µm ZG2-WDS70
Diffuse reflective 100±12 mm 22 mm 2.5 µm 35 µm ZG2-WDS22
Diffuse reflective 50±3 mm 8 mm 1 µm 13 µm ZG2-WDS8T
Regular reflective 22.3±0.5 mm 3 mm 0.25 µm 5 µm ZG2-WDS3VT

Sensor controllers

Power supply Output type Order code
24 VDC NPN ZG2-WDC11A
PNP ZG2-WDC41A

Accessories (order separately)

Real-time parallel output unit

Output type Order code
NPN ZG-RPD11
PNP ZG-RPD41

RS-232C cable

Connecting device Order code
For personal computer connection (2 m) ZS-XRS2
For PLC/PT connection (2 m) ZS-XPT2

Sensor head extension cable

Name Order code
3 m extension cable ZG2-XC3CR
8 m extension cable ZG2-XC8CR
15 m extension cable ZG2-XC15CR
25 m extension cable ZG2-XC25CR
Digital equalizer (relay device) ZG2-XEQ
0.2 m digital equalizer connection cable ZG2-XC02D

Parallel mounting adaptor

Order code
For 1 unit ZS-XPM1
For 2 units or more ZS-XPM2

Controller link unit

Item Order code
Controller link unit ZS-XCN

Memory card

Capacity Order code
128 MB F160-N1285
256 MB F160-N2565

Характеристики

Sensor heads

Item ZG2-WDS70 ZG2-WDS22 ZG2-WDS8T ZG2-WDS3VT
Optical system Diffuse reflective Diffuse reflective Regularreflective Diffuse reflective Regularreflective Regularreflective Diffuse reflective
Measurement range Height direction 210±48 mm
(In the high-precision mode)
100±12 mm 94±10 mm 50±3 mm 44±2 mm 22.3±0.5 mm 10.6±0.4 mm
Width direction (typical) 70 mm 22 mm 8 mm 3 mm
Resolution Height direction 6 µm 2.5 µm 1 µm 0.25 µm
Width direction 111 µm
(70 mm/631 pixels)
35 µm
(22 mm/631 pixels)
13 µm
(8 mm/631 pixels)
5 µm
(3 mm/631 pixels)
Linearity (in the height direction) ±0.1% F.S.
Temperature characteristic 0.02% F.S./°C 0.03% F.S./°C 0.08% F.S./°C
Light source Type Visible semiconductor laser
Wavelength 658 nm 650 nm
Output 5 mW max. output, 1 mW max. exposure (without using optical instruments) 1 mW max.
Laser class Class 2M of EN60825-1 / IEC60825-1
Class IIIB of FDA (21CFR 1040.10 and 1040.11)
Class 2 of EN60825-1 / IEC60825-1
Class II of FDA (21CFR 1040.10 and 1040.11)
Beam shape (at measurement center distance) 120 µm x 75 mm (typical) 60 µm x 45 mm (typical) 30 µm x 24 mm (typical) 25 µm x 4 mm (typical)
LED STANDBY: Lights when laser irradiation preparation is complete (indication color: green)
LD_ON: Lights when the laser is irradiating (indication color: green)
Measurement object Surface of non-transparent objects Surface of non-transparent/transparent objects
Environmental resistance Ambient light intensity Illumination on the photo-receiving face 7,000 lx max.: Incandescent lamp
Ambient temperature Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Degree of protection IP66 (IEC60529) IP67 (IEC60529)
Vibration resistance (destruction) 10 to 150 Hz with 0.35 mm single amplitude for 80 min each in X, Y, and Z directions
Shock resistance (destruction) 150 m/s², 3 times each in 6 directions (up / down, right / left, forward / backward)
Materials Case: Aluminum diecast, Front cover: Glass, Cable insulation: Heat-resistive polyvinyl chloride (PVC),
Connector: Zinc alloy or brass
Cable length 0.5 m, 2 m (flexible cable)
Weight Approx. 650 g Approx. 500 g Approx. 300 g
Accessories Laser labels (EN: 2 labels, FDA: 3 labels), Ferrite core (1), Instruction manual

Sensor controllers

Item ZG2-WDC11/WDC11A ZG2-WDC41/WDC41A
Input/output type NPN PNP
No. of connectable Sensor Heads 1 per Controller
No. of connectable Controllers 2
Measurement cycle 16 ms (high-precision mode), 8 ms (standard mode), 5 ms (high-speed mode)
Min. display unit 10 nm
Display range -999.99999 to 999.99999
Display LCD monitor 1.8-inch TFT color LCD (557x234 pixels)
LEDs
  • Judgment indicators for each task (indication color: orange): T1, T2, T3, T4
  • Laser indicator (indication color: green): LD_ON
  • Zero reset indicator (indication color: green): ZERO
  • Trigger indicators (indication color: green): TRIG
External interface Input/output
signal lines
Analog outputs Select voltage or current (using the sliding switch on the bottom surface)
  • Voltage output: 10 to 10 V, output impedance: 40 Ω
  • Current output: 4 to 20 mA, maximum load resistance: 300 Ω
Judgment output
(ALL-PASSING/ERROR)
NPN open collector
30 VDC, 50 mA max.
Residual voltage: 1.2 V max.
PNP open collector
50 mA max.
Residual voltage: 1.2 V max.
Trigger auxiliary output
(ENABLE/GATE)
Laser stop input (LD-OFF) ON: O V short or 1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
ON: Power supply voltage short or
power supply voltage -1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
Zero reset input (ZERO)
Measurement trigger input (TRIG)
Bank switching input (BANK A, B)
Serial I/O USB2.0 1 port, full speed (12 Mbps), MINI-B
RS-232C 1 port, 115,200 bps max.
Parall output Output 18 - terminal
Main functions No. of settings banks 16
Sensitivity adjustment Multi, High-speed multi, Auto, Fixed
Measurement items Height, 2-point Step, 3-point Step, Edge position, Edge width, Angle, Intersection coordinates, Intersection angle, Sectional area
(up to eight items can be measured simultaneously)
Auxiliary functions Filter, Laser power adjustment, Position correction (height, position, lope), Linked operation, Point of inflection measurement
Profiles saved 16 profiles (1 profile per bank)
Trigger modes External trigger/continuous
Ratings Power supply voltage 21.6 to 26.4 VDC (including ripple current)
Current consumption 0.8 A max. (per sensor head)
Insulation resistance 20 MΩ at 250 V between lead wires and Controller case
Dielectric strength 1,000 VAC, 50 / 60 Hz for 1 min between lead wires and Controller case
Environmental resistance Ambient temperature Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Degree of protection IP20 (IEC 60529)
Vibration resistance (destruction) Vibration frequency: 10 to 150 Hz, single amplitude: 0.35 mm, acceleration: 50 m/s²
Shock resistance (destruction) 150 m/s², 3 times each in 6 directions (up/down, right/left, forward/backward)
Material Case: Polycarbonate (PC),
Cable insulation: Heat-resistive polyvinyl chloride (PCV)
Cable length 2 m
Weight Approx. 300 g (including cable) (Packed state: Approx. 450 g)
Accessories ZG2-WDC_1: Large Ferrite Core (1 piece), Instruction Manual
ZG2-WDC_1A: Large Ferrite Core (1 piece), Small Ferrite Core (2 pieces), Instruction Manual, Setup Support Software (CD-ROM), USB cable (1 m)

Data storage unit

Item ZG2-DSU11 ZG2-DSU41
Input/output type NPN PNP
No. of connectable Controllers 2
Connectable controllers ZG2-WDC11/WDC41
External interface Input/output
signal lines
Inputting starting/
terminating logging
ON: O V short or 1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
ON: Power supply voltage short or power supply voltage
-1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
Judgment output
(HIGH/PASS/LOW/ERROR)
NPN open collector
30 VDC, 50 mA max.
Residual voltage: 1.2 V max.
PNP open collector
50 mA max.
Residual voltage: 1.2 V max.
Serial I/O USB2.0 1 port, full speed (12 Mbps), MINI-B
RS-232C 1 port, 115,200 bps max.
Functions No. of logged data Memory of the main unit Profiles saved: 5,120 profiles
Measurement values saved: 65,000 values max.
Memory card (256 MB) Profiles saved: 35,328 profiles max. (256 profiles x 138 files)
Measurement values saved: 7,150,000 values max. (65,000 values x 110 files)
Logging trigger functions External triggers, data triggers (self-triggers), and time triggers
External banks functions 4096
Other functions Alarm output functions
Ratings Power supply voltage 21.6 to 26.4 VDC (including ripple current)
Current consumption 0.5 A max.
Environmental resistance Ambient temperature Operating: 0 to 50°C, Storage: 0 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Material Case: Polycarbonate (PC)
Cable length 2 m
Weight Approx. 280 g
Accessories Ferrite Core (1 piece), Instruction Manual
Развернуть полное описание
ZG2-DSU11
257552
104 512.00 Рруб.104512.000000
Контроллер датчика ZG2
+

ZG2-DSU41
257553
104 512.00 Рруб.104512.000000
Контроллер датчика ZG2
+

ZG2-WDC11A
257543
268 001.00 Рруб.268001.000000
Контроллер датчика измерения профиля ZG2, NPN, 24 VDC, Includes Smart Monitor ZG Software
+

ZG2-WDC41A
257544
268 001.00 Рруб.268001.000000
ZG контроллер, PNP, 24 VDC, Includes Smart Monitor ZG Software.
+

ZG2-WDS22 0.5M
257546
404 209.00 Рруб.404209.000000
Измерительная головка ZG2
+

ZG2-WDS22 2M
257545
406 515.00 Рруб.406515.000000
ZG измерительная головка, ширина измерения 22mm (35?m), высота профиля 100?12mm (2.5?m)
+

ZG2-WDS3VT 0.5M
257557
652 752.00 Рруб.652752.000000
Измерительная головка ZG2
+

ZG2-WDS3VT 2M
257556
655 560.00 Рруб.655560.000000
ZG измерительная головка, ширина измерения 3mm (5?m), высота профиля 20?0.5mm (0.25?m)
+

ZG2-WDS70 0.5M
257548
639 713.00 Рруб.639713.000000
Измерительная головка ZG2
+

ZG2-WDS70 2M
257547
642 120.00 Рруб.642120.000000
ZG измерительная головка, ширина луча 70mm (111?m), дистанция 210?48mm (6?m)
+

ZG2-WDS8T 0.5M
257555
455 161.00 Рруб.455161.000000
Измерительная головка ZG2
+

ZG2-WDS8T 2M
257554
457 067.00 Рруб.457067.000000
ZG измерительная головка, ширина измерения 8mm (13?m), высота профиля 50?3mm (1?m)
+

ZG2-XC15CR
257550
38 916.00 Рруб.38916.000000
15м удлинительный кабель (требуется 2 x Digital Equalisers & Equaliser connection cable)
+

ZG2-XC25CR
257551
54 763.00 Рруб.54763.000000
25м удлинительный кабель (требуется 2 x Digital Equalisers & Equaliser connection cable)
+

ZG2-XC3CR
257954
22 366.00 Рруб.22366.000000
3м удлинительный кабель (требуется 2 x Digital Equalisers & Equaliser connection cable)
+

ZG2-XC8CR
257549
29 387.00 Рруб.29387.000000
8м удлинительный кабель (требуется 2 x Digital Equalisers & Equaliser connection cable)
+