Предупреждение Для обеспечения высокого уровня обслуживания на этом сайте используются куки (cookies). Продолжая его использование, вы соглашаетесь с тем, что куки (cookies) будут сохраняться на вашем компьютере: Принять

Измерительные датчики Omron ZW

Omron ZW
  • Компактные размеры и малый вес
  • Высокая прочность корпуса
  • Высокая стабильность измерений при работе с различными материалами

Компактные размеры и малый вес, размер датчика всего 1/8 от размера стандартного измерительного датчика.

Omron ZW Компактные размеры и малый вес

Благодаря отсутствию электронных частей в самом сенсоре, достигается высокая стабильность измерений и устойчивость к магнитным и электрическим помехам.

Omron ZW высокая стабильность измерений и устойчивость к магнитным и электрическим помехам.

Информация для заказа

Датчик

Omron ZW-S20 Omron ZW-S30 Omron ZW-S40
Модель ZW-S20 ZW-S30 ZW-S40
Диапазон измерений 20±1 мм 30±3.5 мм 40±6 мм
Диаметр пятна лума 40 μm диа. 60 μm диа. 80 μm диа..
Статическое разрешение 0.25 μm 0.25 μm 0.25 μm

Усилитель

Вид Напряжение питания Тип выхода Модель
Усилитель Omron ZW-C1 24 VDC NPN ZW-C10T
ZW-C10AT
PNP ZW-C15T
ZW-C15AT

Кабели

Вид Описание Длина кабеля Модель
Кабель для Omron ZW Сенсор - КонтроллерОптоволоконный кабель расширения (гибкий кабель) (Оптоволоконный адаптер ZW-XFC предоставляется) 2 м ZW-XF02R
5 м ZW-XF05R
10 м ZW-XF10R
20 м ZW-XF20R
30 м ZW-XF30R
Кабель для Omron ZW Оптоволоконный адаптер(между датчиком с кабелем оптоволоконный кабелем расширения) ZW-XFC
Кабель для Omron ZW Параллельный кабель 2 м ZW-XCP2
Кабель для Omron ZW Кабель RS-232C Для ПК 2 м ZW-XRS2
Кабель для Omron ZW Кабель RS-232CДля ПЛК/программированного терминала 2 м ZW-XPT2

Характеристики

Sensor head

Item ZW-S07 ZW-S20 ZW-S30 ZW-S40 ZW-SR07 ZW-SR20 ZW-SR40
Measuring center distance 7 mm 20 mm 30 mm 40 mm 7 mm 20 mm 40 mm
Measuring range ±0.3 mm ±1 mm ±3 mm ±6 mm ±0.3 mm ±1 mm ±6 mm
Static resolution 0.25 µm 0.25 µm 0.25 µm 0.25 µm 0.25 µm 0.25 µm 0.25 µm
Linearity ±0.8 µm ±1.2 µm ±4.5 µm ±7.0 µm ±1.1 µm ±1.6 µm ±9.3 µm
Spot diameter Near 20 µm dia. 45 µm dia. 70 µm dia. 90 µm dia. 20 µm dia. 45 µm dia. 90 µm dia.
Center 18 µm dia. 40 µm dia. 60 µm dia. 80 µm dia 18 µm dia. 40 µm dia. 80 µm dia
Far 20 µm dia. 45 µm dia. 70 µm dia. 90 µm dia 20 µm dia. 45 µm dia. 90 µm dia
Measuring cycle 500 µs to 10 ms
Operating ambient illumination Illumination on object surface 10,000 lx or less: incandescent light
Ambient temperature range Operating: 0 to 50°C, Storage: −15 to 60°C
(with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85%
(with no condensation)
Degree of protection IP40 (IEC60529)
Vibration resistance (destructive) 10 to 150 Hz, 0.35 mm single amplitude, 80 min each in X, Y, and Z directions
Shock resistance (destructive) 150 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Temperature characteristic 0.6 µm/°C
(0.45 μm/°C)
1.5 µm/°C
(1.0 μm/°C)
2.8 µm/°C
(2.0 μm/°C)
4.8 µm/°C
(3.8 μm/°C)
0.6 µm/°C
(0.45 μm/°C)
1.5 µm/°C
(1.0 μm/°C)
4.8 µm/°C
(3.8 μm/°C)
Materials Case: aluminum die-cast
Fiber cable sheat: PVC
Calibration ROM: PC
Fiber cable length 0.3 m, 2 m (Flex-resistant cable)
Fiber cable minimum bending radius 20 mm
Insulation resistance (Calibration ROM) Between case and all terminals: 20 MΩ (by 250 V megger)
Dielectric strength (Calibration ROM) Between case and all terminals: 1,000 VAC, 50/60 Hz, 1 min
Weight Approx. 105 g (Chassis, fiber cable total)
Accessories included with sensor head Instruction sheet, Fixing screw (M2) for Calibration ROM, Precautions for correct use

Automation software Sysmac Studio

System requirements

Item Condition
Operating system (OS), Windows XP (Service Pack 3 or higher, 32-bit version)/Vista(32-bit version)/7(32-bit/64-bit version)
CPU Windows computers with Celeron 540 (1.8 GHz) or faster CPU.
Core i5 M520 (2.4 GHz) or equivalent or faster recommended
Main memory 2 GB min.
Recommended video memory/video card for using 3D motion trace Video memory: 512 MB min.
Video card: Either of the following video cards:
• NVIDIA GeForce 200 Series or higher
• ATI RadeonHD5000 Series or higher
Hard disk At least 1.6 GB of available space
Display XGA 1024 x 768, 16 million colors.
WXGA 1280 x 800 min. recommended
Disk drive DVD-ROM drive
Communication ports USB port corresponded to USB 2.0, or Ethernet port
Supported languages Japanese, English, German, French, Italian, Spanish, simplified Chinese, traditional Chinese, Korean

Setting software Smart Monitor ZW ZW-SW101

System requirements

Item Condition
Operating System(OS) Windows 7 (32 or 64-bit version)
Windows XP (Service Pack3 or more, 32-bit version)
CPU Intel Pentium III, 850 MHz or more (2 GHz or more is recommended.)
Main memory 1 GB or more
Hard disk 50 MB or more
Display 1024 x 768 dots or more, 16 million colors or more
Supported languages Japanese/English
Communication port Ethernet port

Controller

Item ZW-CE10T ZW-CE15T
Input/Output type NPN PNP
Number of connected sensor heads 1 per Controller
Sensor head compatibility Available
Light source for measurement White LED
Segment display Main display 11-segment red display, 6 digits
Sub-display 11-segment green display, 6 digits
LED display Status indicators HIGH (orange), PASS (green), LOW (orange), STABILITY (green), ZERO (green),
ENABLE (green), THRESHOLD-H (orange), THRESHOLD-L (orange), RUN (green)
EtherCAT indicators L/A IN (Link Activity IN) (green), L/O OUT (Link Activity OUT) (green), ECAT RUN (green), ECAT ERR (red)
External interface Ethernet 100BASE-TX, 10BASE-T, No-protocol communications (TCP/UDP), EtherNet/IPTM
EtherCAT EtherCAT-specific protocol 100BASE-TX
RS-232C 115,200 bps max.
Analog output terminal block Analog voltage output (OUT1V) -10 to 10 V, output impedance: 100 Ω
Analog current output (OUT1A) 4 to 20 mA, maximum load resistance: 300 Ω
32-pole
extension
connector
Judgment output
(HIGH1/PASS1/LOW1)
Transistor output system
Output voltage: 21.6 to 30 VDC
Load current: 50 mA or less
Residual voltage when turning ON: 1.2 V or less
Leakage voltage when turning OFF: 0.1 mA or les
BUSY output (BUSY1)
ALARM output (ALARM1)
ENABLE output (ENABLE)
LED OFF input (LED OFF1) DC input system
Input voltage: 24 VDC -10% (21.6 to 26.4 VDC)
Input current: 7 mA Typ. (24 VDC)
Voltage/Current when turning ON: 19 V/3 mA or more
Voltage/Current when turning OFF: 5 V/1 mA or less
ZERO RESET input (ZERO)
TIMING output (TIMING1)
RESET output (RESET1)
Bank Selected bank output
(BANK_OUT 1 to 3)
Transistor output system
Output voltage: 21.6 to 30 VDC
Load current: 50 mA or less
Residual voltage when turning ON: 1.2 V or less
Leakage voltage when turning OFF: 0.1 mA or less
Selected bank input
(BANK_SEL 1 to 3)
DC input system
Input voltage: 21.6 to 26 VDC
Input current: 7 mA Typ. (24 VDC)
Voltage/Current when turning ON: 19 V/3 mA or more
Voltage/Current when turning OFF: 5 V/1 mA or less
Main functions Exposure time Auto/Manual
Measuring cycle 500 µs to 10 ms
Material setting Standard/Mirror/Diffusion surfaces
Measurement Item Height/Thickness/Calculation
Filtering Median/Average/Differentiation/High pass/Low pass/Band pass
Outputs Scaling/Different holds/Zero reset/Logging for a measured value
Display Measured value/Threshold value/Analog output voltage or current value/Judgment result/Resolution/Exposure time
Number of configurable banks Max. 8 banks
Task process Multi-task (up to 4 tasks per bank)
System Save/Initialization/Display measurement information/Communication settings/Sensor Head calibration/Key-lock/
Trigger-key input
Ratings Power supply voltage 21.6 to 26.4 VDC (including ripple)
Current consumption 600 mA max.
Insulation resistance Across all lead wires and controller case: 20 MΩ (by 250 V megger)
Dialectic strength Across all lead wires and controller case: 1,000 VAC, 50/60 Hz, 1 min.
Environmental Degree of protection IP20 (IEC60529)
Vibration resistance (destructive) 10 to 55 Hz, 0.35-mm single amplitude, 50 min each in X, Y, and Z directions
Shock resistance (destructive) 150 m/s2, 3 times each in six directions (up/down, left/right, forward/backward)
Ambient temperature Operating: 0 to 40°C
Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Grounding D-type grounding (Grounding resistance of 100 Ω or less)
Note: For conventional Class D grounding
Materials Case: PC
Weight Approx. 750 g (main unit only), approx. 150 g (Parallel cable)
Accessories included with controller Instruction sheet, Member registration sheet, Parallel cable ZW-XCP2E

ZW series EtherCAT communications specifications

Item Specification
Communications standard IEC61158 Type12
Physical layer 100BASE-TX (IEEE802.3)
Connectors RJ45 x 2
ECAT IN: EtherCAT input
ECAT OUT: EtherCAT output
Communications media Category 5 or higher (cable with double, aluminum tape and braided shielding) is recommended.
Communications distance Distance between nodes: 100 m max.
Process data Variable PDO mapping
Mailbox (CoE) Emergency messages, SDO requests, SDO responses, and SDO information
Distributed clock Synchronization in DC mode.
LED display L/A IN (Link/Activity IN) x 1, AL/A OUT (Link/Activity OUT) x 1, AECAT RUN x 1, AECAT ERR x 1
Развернуть полное описание

В этой категории нет товаров