Световой барьер безопасности Omron F3SJ-A
Семейство F3SJ-A — это световые барьеры безопасности типа 4 с разрешающей способностью 14 мм и 30 мм. Ширина барьера достигает 9 м, высота варьируется в пределах от 245 мм до 2495 мм, обнаружение обеспечивается по всей площади барьера, мертвые зоны отсутствуют.
- Высота барьера = длина датчика.
- Поддерживаются функции селективного пропуска и гашения лучей.
- Последовательное соединение до четырех барьеров.
- Светодиодная шкала упрощает центровку и диагностику.
- Датчик типа 4 в соответствии со стандартом EN 61496-1, уровень эффективности (PL) вплоть до «e» согласно EN ISO 13849-1.
Заказная информация
| Application | Detection capability | Beam gap | Operating range | Protective height (mm) | Order code |
|---|---|---|---|---|---|
| Finger protection | Dia. 14 mm | 9 mm | 0.2 to 9 m | 245 to 1,631 | F3SJ-A____P14 |
| Hand/arm protection | Dia. 30 mm | 25 mm | 0.2 to 9 m | 245 to 1,620 | F3SJ-A____P30 |
| 0.2 to 7 m | 1,745 to 2,495 |
Safety light curtain model list
F3SJ-A14 series (9 mm gap), F3SJ-A14 TS series (9 mm gap)
| Number of beams | Protective height (mm) | Order code |
|---|---|---|
| 26 | 245 | F3SJ-A0245P14 |
| 28 | 263 | F3SJ-A0263P14 |
| 34 | 317 | F3SJ-A0317P14 |
| 42 | 389 | F3SJ-A0389P14 |
| 50 | 461 | F3SJ-A0461P14 |
| 60 | 551 | F3SJ-A0551P14 |
| 68 | 623 | F3SJ-A0623P14 |
| 76 | 695 | F3SJ-A0695P14 |
| 80 | 731 | F3SJ-A0731P14 |
| 88 | 803 | F3SJ-A0803P14 |
| 96 | 875 | F3SJ-A0875P14 |
| 108 | 983 | F3SJ-A0983P14 |
| 116 | 1,055 | F3SJ-A1055P14 |
| 124 | 1,127 | F3SJ-A1127P14 |
| 132 | 1,199 | F3SJ-A1199P14 |
| 140 | 1,271 | F3SJ-A1271P14 |
F3SJ-A30 series (25 mm gap)
| Number of beams | Protective height (mm) | Order code |
|---|---|---|
| 10 | 245 | F3SJ-A0245P30 |
| 12 | 295 | F3SJ-A0295P30 |
| 16 | 395 | F3SJ-A0395P30 |
| 19 | 470 | F3SJ-A0470P30 |
| 21 | 520 | F3SJ-A0520P30 |
| 22 | 545 | F3SJ-A0545P30 |
| 23 | 570 | F3SJ-A0570P30 |
| 25 | 620 | F3SJ-A0620P30 |
| 29 | 720 | F3SJ-A0720P30 |
| 32 | 795 | F3SJ-A0795P30 |
| 35 | 870 | F3SJ-A0870P30 |
| 37 | 920 | F3SJ-A0920P30 |
| 38 | 945 | F3SJ-A0945P30 |
| 41 | 1,020 | F3SJ-A1020P30 |
| 44 | 1,095 | F3SJ-A1095P30 |
| 45 | 1,120 | F3SJ-A1120P30 |
| 48 | 1,195 | F3SJ-A1195P30 |
| 51 | 1,270 | F3SJ-A1270P30 |
| 56 | 1,395 | F3SJ-A1395P30 |
| 65 | 1,620 | F3SJ-A1620P30 |
| 70 | 1,745 | F3SJ-A1745P30 |
| 75 | 1,870 | F3SJ-A1870P30 |
| 80 | 1,995 | F3SJ-A1995P30 |
| 90 | 2,245 | F3SJ-A2245P30 |
| 95 | 2,370 | F3SJ-A2370P30 |
| 100 | 2,495 | F3SJ-A2495P30 |
Аксессуары. Продаются отдельно
Single-end connector cable (2 cables per set, for emitter and receiver)
| Appearance | Cable length | Specifications | Order code |
|---|---|---|---|
 |
3 m | M12 connector (8-pin) | F39-JD3A |
| 7 m | F39-JD7A | ||
| 10 m | F39-JD10A | ||
| 15 m | F39-JD15A | ||
| 20 m | F39-JD20A |
Setting Tools
| Appearance | Type | Remarks | Order code |
|---|---|---|---|
 |
“SD Manager” Setting support software for the F3SJ |
Accessories: SD Manager CD-ROM (1), F39-CN1 branch connector (1), Connector cap (1), 2-m Dedicated cable (1), 0.3-m Dedicated cable with plug (1), Instruction manual |
F39-GWUM |
Sensor Mounting Brackets (Sold separately)
| Appearance | Specifications | Application | Remarks | Order code |
|---|---|---|---|---|
 |
Standard mounting bracket (for top/bottom) |
(provided with the F3SJ) | 2 for an emitter, 2 for a receiver, total of 4 per set |
F39-LJ1 |
 |
Flat side mounting bracket | Use these small-sized brackets when performing side mounting with standard mounting brackets, so that they do not protrude from the detection surface. | 2 for an emitter, 2 for a receiver, total of 4 per set |
F39-LJ2 |
 |
Free-location mounting bracket (also used as standard intermediate bracket) |
Use these brackets for mounting on any place without using standard bracket. | Two brackets per set |
F39-LJ3 |
 |
F3SN Intermediate bracket Replacement spacers |
When replacing the F3SN with the F3SJ, the mounting hole pitches in the Intermediate Brackets are not the same. This Spacer is placed between the mounting holes to mount the F3SJ. | 1 set with 2 pieces |
F39-LJ3-SN |
 |
Top/bottom bracket B (mounting hole pitch 19 mm) |
Mounting bracket used when replacing existing area sensors (other than F3SN or F3WN) with the F3SJ. For front mounting. Suitable for mounting hole pitch of 18 to 20 mm. |
2 for an emitter, 2 for a receiver, total of 4 per set |
F39-LJ4 |
 |
Bracket for replacing short-length F3SN |
Mounting bracket used when an F3SN with protective height of 300 mm or less is replaced by an F3SJ. | 2 for an emitter, 2 for a receiver, total of 4 per set |
F39-LJ5 |
 |
Space-saving mounting bracket | Use these brackets to mount facing inward. Length is 12 mm shorter than the standard F39-LJ1 bracket. |
2 for an emitter, 2 for a receiver, total of 4 per set |
F39-LJ8 |
 |
Top/bottom bracket C (mounting hole pitch 13 mm) | Mounting bracket used when replacing existing area sensors having a mounting pitch of 13 mm with the F3SJ. | 2 for an emitter, 2 for a receiver, total of 4 per set |
F39-LJ11 |
Laser pointer
| Appearance | Output | Order code |
|---|---|---|
 |
Laser pointer for F3SJ | F39-PTJ |
Характеристики
F3SJ-A ____ P14/P30
| Model | F3SJ-A____P14 | F3SJ-A____P30 | |
|---|---|---|---|
| Sensor type | Type 4 safety light curtain | ||
| Version | Ver. 2 | ||
| Setting tool connection | Connectable | ||
| Safety category | Safety purpose of category 4, 3, 2, 1, or B | ||
| Detection capability | Opaque objects 14 mm in diameter | Opaque objects 30 mm in diameter | |
| Beam gap (P) | 9 mm | 25 mm | |
| Number of beams (n) | 26 to 180 | 10 to 100 | |
| Protective height (PH) | 245 to 1,631 mm | 245 to 2,495 mm | |
| Lens diameter | Diameter 5 mm | ||
| Operating range | 0.2 to 9 m (protective height 1,640 mm max.), 0.2 to 7 m (protective height 1,655 mm min.) (Depending on the setting tool, the detection distance can be shortened to 0.5 m.) |
||
| Response time (under stable light incident condition) |
ON to OFF | 1 set, 0245 to 983: 11 ms to 17.5 ms max. 1,055 or higher: 20 ms to 25 ms max. |
1 set: 10 ms to 17.5 ms max. |
| OFF to ON | 1 set, 0245 to 983: 44 ms to 70 ms max. 1,055 or higher: 80 ms to 100 ms max. |
1 set: 40 ms to 70 ms max. | |
| Startup waiting time | 2 s max. (2.2 s max. for series connection) | ||
| Power supply voltage (Vs) | 24 VDC±20% (ripple p-p10% max.) | ||
| Current consumption (no load) |
Emitter | To 50 beams: 76 mA max., 51 to 100 beams: 106 mA max., 101 to 150 beams: 130 mA max., 151 to 180 beams: 153 mA max., 201 to 234 beams: 165 mA max. |
|
| Receiver | To 50 beams: 68 mA max., 51 to 100 beams: 90 mA max., 101 to 150 beams: 111 mA max., 151 to 180 beams: 128 mA max., 201 to 234 beams: 142 mA max. |
||
| Light source (emitted wavelength) | Infrared LED (870 nm) | ||
| Effective aperture angle (EAA) | Based on IEC 61496-2.Within±2.5° for both emitter and receiver when the detection distance is 3 m or over | ||
| Safety outputs (OSSD) | Two PNP transistor outputs, load current 300 mA max., residual voltage 2 V max. (except for voltage drop due to cable extension), allowable capacity load 2.2 μF, leak current 1 mA max. (This can be different from traditional logic (ON/OFF) because safety circuit is used.) |
||
| Auxiliary output 1 (Non-safety output) |
One PNP transistor output, load current 300 mA max., residual voltage 2 V max. (except for voltage drop due to cable extension), leak current 1 mA max. |
||
| Auxiliary output 2 (Non-safety output. Function for Basic System.) | One PNP transistor output, load current 50 mA max., residual voltage 2 V max. (except for voltage drop due to cable extension), leak current 1 mA max. |
||
| External indicator output (Non-safety output) |
Available indicators Incandescent lamp : 24 VDC, 3 to 7 W LED lamp: Load current 10 mA to 300 mA max., leak current 1 mA max. (To use an external indicator, an F39-JJ3N universal indicator cable or an F39-A01P-PAC dedicated external indicator kit is required.) |
||
| Output operation mode | Receiver | Safety output 1, 2: ON when receiving light Auxiliary output 1: Inverse of safety output signals (Operation mode can be changed with the setting tool.) External indicator output 1 : Inverse of safety output signals for a basic system (Operation mode can be changed with the setting tool.), ON when muting/override for a muting system (Operation mode can be changed with the setting tool.) |
|
| Emitter | Auxiliary output 2: Turns ON when the point of 30,000 operating hours is reached (Operation mode can be changed with the setting tool.) External indicator output 2 : ON when lock-out for a basic system (Operation mode can be changed with the setting tool.) ON when muting/override for a muting system (Operation mode can be changed with the setting tool.) |
||
| Model | F3SJ-A____P14 | F3SJ-A____P30 | |
|---|---|---|---|
| Input voltage | Test input, interlock selection input, reset input, and muting input are all ON voltage: 9 to 24 V (Vs) (sink current: 3 mA max.), OFF voltage: 0 to 1.5 V, or open External device monitoring input ON voltage: 9 to 24 V (Vs) (sink current: 5 mA max.), OFF voltage: 0 to 1.5 V, or open |
||
| Indicator | Emitter | Light intensity level indicators (green LED x 2, orange LED x 3): ON based on the light intensity Error mode indicators (red LED x 3): Blink to indicate error details Power indicator (green LED x 1): ON while power is on Interlock indicator (yellow LED x 1): ON while under interlock, blinks at lockout. External device monitoring indicator (muting input 1 indicator), Blanking/test indicator (muting input 2 indicator) (green LED x 2): ON/flash according to function |
|
| Receiver | Light intensity level indicators (green LED x 2, orange LED x 3): ON based on the light intensity Error mode indicators (red LED x 3): Blink to indicate error details OFF output indicator (red LED x 1): ON when safety output is OFF, blinks at lockout. ON output indicator (green LED x 1): ON while safety output is ON Muting error indicator, Blanking/test indicator (green LED x 2): ON/flash according to function |
||
| Mutual interference prevention function | Interference light prevention algorithm, sensing distance change function | ||
| Series connection | Time division emission by series connection Number of connections: up to 4 sets (F3SJ-A only) F3SJ-E, F3SJ-B and F3SJ-TS cannot be connected. Total number of beams: up to 400 beams Maximum cable length for 2 sets: no longer than 15 m |
||
| Test function | Self test (at power-ON and at power distribution) External test (emission stop function by test input) |
||
| Safety-related functions | Start interlock, restart interlock (Must be set with a setting tool when the muting function is used.) External device monitor Muting (Lamp burnout detection, override function included. F39-CN6 key cap for muting is required.) Fixed blanking (must be set by a setting tool) Floating blanking (must be set by a setting tool) |
||
| Connection method | Connector method (M12, 8-pin) | ||
| Protection circuit | Output short-circuit protection, and power supply reverse polarity protection | ||
| Ambient temperature | Operating: -10 to 55°C (no icing), Storage: -30 to 70°C | ||
| Ambient humidity | Operating: 35% to 85% (no condensation), Storage: 35% to 95% | ||
| Operating ambient light intensity | Incandescent lamp: receiving-surface light intensity of 3,000 lx max., Sunlight: receiving-surface light intensity of 10,000 lx max. | ||
| Insulation resistance | 20 MΩ min. (at 500 VDC) | ||
| Withstand voltage | 1,000 VAC 50/60 Hz, 1 min | ||
| Degree of protection | IP65 (IEC 60529) | ||
| Vibration resistance | Malfunction: 10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps in X, Y, and Z directions | ||
| Shock resistance | Malfunction: 100 m/s2, 1,000 times each in X, Y, and Z directions | ||
| Material | Casing (including metal parts on both ends): Aluminum, zinc die-cast Cap: ABS resin, Optical cover: PMMA resin (acrylic), Cable: Oil resistant PVC |
||
| Weight (packaged) | Calculate using the following expressions: (1) For F3SJ-A____14, weight (g) = (protective height) x 1.7 + α (2) F3SJ-A____30, weight (g) = (protective height) x 1.5 + α The values for α are as follows: Protected height 245 to 596 mm: = 1,100 protected height 1,660 to 2,180 mm: = 2,400 Protected height 600 to 1,130 mm: = 1,500 protected height 2,195 to 2,500 mm: = 2,600 Protected height 1,136 to 1,658 mm: = 2,000 |
||
| Accessories | Test rod (*1), instruction manual, standard mounting bracket (F39-LJ1 bracket for top/bottom mounting), mounting brackets (intermediate) (*2), error mode label, User's Manual (CD-ROM) *1. The F3SJ-A____55 is not included. *2. Number of intermediate brackets depends on protective height of F3SJ. For protective height from 600 to 1,130 mm : 1 set for each of the emitter and receiver is included For protective height from 1,136 to 1,658 mm: 2 sets for each of the emitter and receiver are included For protective height from 1,660 to 2,180 mm : 3 sets for each of the emitter and receiver are included For protective height from 2,195 to 2,500 mm : 4 sets for each of the emitter and receiver are included |
||
| Applicable standards | IEC 61496-1, EN 61496-1 UL 61496-1, Type 4 ESPE (Electro-Sensitive Protective Equipment) IEC 61496-2, CLC/TS 61496-2, UL 61496-2, Type 4 AOPD (Active Opto-electronic Protective Devices) IEC 61508-1 to -3, EN 61508-1 to -3 SIL3 IEC 13849-1: 2006, EN ISO 13849-1: 2008 (PLe, Cat.4) UL 508, UL 1998, CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8 |
||
Response Time
| Model | Protected height (mm) | Number of beams | Response time ms (ON to OFF) | Response time ms (OFF to ON) |
|---|---|---|---|---|
| F3SJ-A____14 Series | 245 to 263 | 26 to 28 | 11 | 44 |
| 281 to 389 | 30 to 42 | 12 | 48 | |
| 407 to 497 | 44 to 54 | 13 | 52 | |
| 515 to 605 | 56 to 66 | 14 | 56 | |
| 623 to 731 | 68 to 80 | 15 | 60 | |
| 767 to 983 | 84 to 108 | 17.5 | 70 | |
| 1,055 to 1,271 | 116 to 140 | 20 | 80 | |
| 1,343 to 1,559 | 148 to 172 | 22.5 | 90 | |
| 1,631 | 180 | 25 | 100 | |
| F3SJ-A____30 Series | 245 to 395 | 10 to 16 | 10 | 40 |
| 420 to 720 | 17 to 29 | 11 | 44 | |
| 745 to 1,045 | 30 to 42 | 12 | 48 | |
| 1,070 to 1,295 | 43 to 52 | 13 | 52 | |
| 1,395 to 1,620 | 56 to 65 | 14 | 56 | |
| 1,745 to 1,995 | 70 to 80 | 15 | 60 | |
| 2,120 to 2,495 | 85 to 100 | 17.5 | 70 |
