Бесконтактный дверной выключатель Omron F3S-TGR-N_C
Бесконтактные дверные выключатели с кодировкой принцип действия которых основан на эффекте Холла, предназначены для контроля положения защитного ограждения. Для пищевых производств с повышенными требованиями к гигиене предлагаются модели в корпусе из нержавеющей стали.
- Принцип действия основан на эффекте Холла
- LED индикатор облегчает диагностику
- Возможность последовательного подключения до 3 выключателей
- Работает со всеми котроллерами систембезопасности Omron
- Возможность работы даже позади конструкций из нержавеющей стали
- Отсутствие контакта - отсутствие износа - отсутствие мелких частиц
- Компенсация допустимых механических отклонений
- Подходит для задач очистки/стерилизации (CIP/SIP), а также для очистки под высоким давлением по IP69K (модели с встроенным кабелем)
- Соответствует требованиям безопасности до PLe по EN ISO 13849-1
Заказная информация
Polyester housing
| Type | Cable connection | Contact configuration | Order code |
|---|---|---|---|
Elongated sensors
| 5 m pre-wired | 2NC/1NO | F3S-TGR-NLPC-21-05 |
| 10 m pre-wired | F3S-TGR-NLPC-21-10 | ||
| M12, 8-pin | F3S-TGR-NLPC-21-M1J8 | ||
Small sensors |
5 m pre-wired | F3S-TGR-NSPC-21-05 | |
| 10 m pre-wired | F3S-TGR-NSPC-21-10 | ||
| M12, 8-pin | F3S-TGR-NSPC-21-M1J8 | ||
Miniature sensors |
5 m pre-wired | F3S-TGR-NMPC-21-05 | |
| 10 m pre-wired | F3S-TGR-NMPC-21-10 | ||
| M12, 8-pin | F3S-TGR-NMPC-21-M1J8 | ||
Barrel sensors |
5 m pre-wired | F3S-TGR-NBPC-21-05 | |
| 10 m pre-wired | F3S-TGR-NBPC-21-10 | ||
| M12, 8-pin | F3S-TGR-NBPC-21-M1J8 |
Stainless steel housing
| Type | Cable connection | Contact configuration | Order code |
|---|---|---|---|
Elongated sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NLMC-21-05 |
| 10 m pre-wired | F3S-TGR-NLMC-21-10 | ||
| M12, 8-pin | F3S-TGR-NLMC-21-M1J8 | ||
Small sensors |
5 m pre-wired | F3S-TGR-NSMC-21-05 | |
| 10 m pre-wired | F3S-TGR-NSMC-21-10 | ||
| M12, 8-pin | F3S-TGR-NSMC-21-M1J8 | ||
Barrel sensors |
5 m pre-wired | F3S-TGR-NBMC-21-05 | |
| 10 m pre-wired | F3S-TGR-NBMC-21-10 | ||
| M12, 8-pin | F3S-TGR-NBMC-21-M1J8 |
Hygienic and food types
| Type | Cable connection | Contact configuration | Order code |
|---|---|---|---|
Small sensors |
5 m pre-wired | 2NC/1NO | F3S-TGR-NSHC-21-05 |
| 10 m pre-wired | F3S-TGR-NSHC-21-10 | ||
| M12, 8-pin | F3S-TGR-NSHC-21-M1J8 | ||
Small sensors (Special food type) |
5 m pre-wired | F3S-TGR-NSFC-21-05 | |
| 10 m pre-wired | F3S-TGR-NSFC-21-10 | ||
| M12, 8-pin | F3S-TGR-NSFC-21-M1J8 | ||
Miniature sensors |
5 m pre-wired | F3S-TGR-NMHC-21-05 | |
| 10 m pre-wired | F3S-TGR-NMHC-21-10 | ||
| M12, 8-pin | F3S-TGR-NMHC-21-M1J8 |
Заказная информация
| Item | Model | Polyester types | Stainless steel types |
|---|---|---|---|
| Serial switching | up to 3 pcs. | ||
| Indicator LED | - | LED green - Indication of safety circuit closed | |
| Operating distance | OFF - ON (Sao) | Min. 8 mm/max. 10 mm | |
| ON - OFF (Sar) | Min. 12 mm/max. 22 mm | ||
| Actuator approach speed | Min. Max. |
4 mm/s 1,000 mm/s |
|
| Operating temperature | - | -25 to 80°C | -25 to 105°C |
| Enclosure protection | Flying lead M12 connector |
IP69K IP67 |
|
| Material cable | Flying lead | PVC, Ø 6 mm o.d. | |
| M12 connector | 250 mm, PVC, Ø 6 mm o.d. | ||
| Material housing | - | Black polyester | Stainless steel 316 |
Electrical data
| Item | Model | Polyester types | Stainless steel types | |
|---|---|---|---|---|
| Sensor technology | - | Hall | ||
| Power supply | - | 24 VDC±15% | ||
| Power consumption | Max. | 50 mA | ||
| Switching current | Min. | 10 mA, 10 VDC | ||
| Rated loads | NC contacts NO contact |
Max. | 200 mA, 24 VDC 200 mA, 24 VDC |
|
| Output type | - | Electronic output (potential-free optocoupler output) | ||
Approved standards
| EN standards certified by TÜV Rheinland |
|---|
| EN ISO13849-1 |
| EN 62061 |
| EN ISO 14119 |
| EN 60204-1 |
| EN/IEC 60947-5-3 |
| UL 508, CSA C22.2 |
| BS 5304 |
| EN 1088-1 conformance |
Accessories
| Order code | ||
|---|---|---|
| Cables 8-pin | 2 m | Y92E-M12PURSH8S2M-L |
| 5 m | Y92E-M12PURSH8S5M-L | |
| 10 m | Y92E-M12PURSH8S10M-L | |
| 25 m | Y92E-M12PURSH8S25M-L | |
| T-connector connection cable | M12 T-connector for M12 connector-types | F39-TGR-NT |
| 0.6 m, M12-8pin | Y92E-M12FSM12MSPURSH806M-L | |
| 2 m, M12-8pin | Y92E-M12FSM12MSPURSH82M-L | |
| 5 m, M12-8pin | Y92E-M12FSM12MSPURSH85M-L | |
| 10 m, M12-8pin | Y92E-M12FSM12MSPURSH810M-L | |
| Actuators | for F3S-TGR-NLPC | F39-TGR-NLPC-A |
| for F3S-TGR-NSPC | F39-TGR-NSPC-A | |
| for F3S-TGR-NMPC | F39-TGR-NMPC-A | |
| for F3S-TGR-NCPC | F39-TGR-NCPC-A | |
| for F3S-TGR-NWPC | F39-TGR-NWPC-A | |
| for F3S-TGR-NBPC | F39-TGR-NBPC-A | |
| for F3S-TGR-NLMC | F39-TGR-NLMC-A | |
| for F3S-TGR-NSMC | F39-TGR-NSMC-A | |
| for F3S-TGR-NBMC | F39-TGR-NBMC-A | |
| for F3S-TGR-NSHC | F39-TGR-NSHC-A | |
| for F3S-TGR-NSFC | F39-TGR-NSFC-A | |
| for F3S-TGR-NMHC | F39-TGR-NMHC-A | |
| Mounting screws | Set of Torx safety screws (M4, 4 x 30 mm, 4 x 20 mm, 4 x 10 mm; incl. washers and Torx bit) |
F39-TGR-N-SCREWS |
