Корзина пуста
Цифровые панельные индикаторы-измерители Omron K3GN

Цифровые измерители OMRON K3GN – это качество, надежность, профессиональный дизайн и удобство в эксплуатации для любых применений. Преимущества новых устройств: высокое качество, прекрасная рентабельность и оптимальное соотношение капиталовложений/отдача, а также дополнительные функции, привлекательные для пользователей
OMRON K3GN – Универсальный регулятор процесса
Многофункциональный регулятор K3GN может быть использован в качестве многозадачного регулятора процесса и индикатора: тахометр(об/мин), цифровой индикатор для PC или PLC. Дисплей (5 разрядов)может быть запрограммирован на изменение цвета отображаемого значения в случае аварийных режимов и т.п. Диапазон значений индикатора от -19999 до 99999, что полностью перекрывает требования существующих задач. Регулятор K3GN имеет три транзисторных выхода, два из которых могут быть запрограммированы как аварийные и один как "нормальная" работа. Для приложений, где необходима высокая точность, K3GN обеспечит ± 0,1% от индуцированного значения.
Информация для заказа OMRON K3GN:
Тип сигнала на входе | Питание | Сигнал на выходе | Коммуникации | |
---|---|---|---|---|
--- | RS-485 | |||
DC voltage/current, NPN | 24 VDC | Реле: 2 SPST-NO, 1A/30 VDC | K3GN-NDC 24 VDC | K3GN-NDC-FLK 24 VDC |
Транзистор: 3NPN или 3PNP | K3GN-NDT1 24 VDC | K3GN-NDT1-FLK 24 VDC | ||
DC voltage/current, PNP | Реле: 2 SPST-NO, 1A/30 VDC | K3GN-PDC 24 VDC | K3GN-PDC-FLK 24 VDC | |
Транзистор: 3NPN или 3PNP | K3GN-PDT2 24 VDC | K3GN-PDT2-FLK 24 VDC |
Питание | Тип входа | Тип выхода | Модель | |
---|---|---|---|---|
Выход | Выход для передачи данных | |||
24 VDC | DC voltage, DC current, or NPN input |
2 relay contact outputs (SPST-NO) |
None | K3GN-NDC 24 VDC |
RS-485 | K3GN-NDC-FLK 24 VDC | |||
DC current (0 to 20 mA, 4 to 20 mA) |
K3GN-NDC-L1 24 VDC | |||
DC voltage (0 to 5 V, 1 to 5 V, 0 to 10 V) |
K3GN-NDC-L2 24 VDC | |||
2 relay contact outputs (SPST-NO) Normally energized relays (See note.) |
None | K3GN-NDC-400 24 VDC | ||
RS-485 | K3GN-NDC-FLK-400 24 VDC | |||
DC current (0 to 20 mA, 4 to 20 mA) |
K3GN-NDC-L1-400 24 VDC | |||
DC voltage (0 to 5 V, 1 to 5 V, 0 to 10 V) |
K3GN-NDC-L2-400 24 VDC | |||
3 transistor outputs (NPN open collector) |
None | K3GN-NDT1 24 VDC | ||
RS-485 | K3GN-NDT1-FLK 24 VDC | |||
DC current (0 to 20 mA, 4 to 20 mA) |
K3GN-NDT1-L1 24 VDC | |||
DC voltage (0 to 5 V, 1 to 5 V, 0 to 10 V) |
K3GN-NDT1-L2 24 VDC | |||
DC voltage, DC current, or PNP input |
2 relay contact outputs (SPST-NO) |
None | K3GN-PDC 24 VDC | |
RS-485 | K3GN-PDC-FLK 24 VDC | |||
3 transistor outputs (PNP open collector) |
None | K3GN-PDT2 24 VDC | ||
RS-485 | K3GN-PDT2-FLK 24 VDC |
Характеристики
Supply voltage | 24 VDC |
Operating voltage range | 85 to 110% of the rated supply voltage |
Power consumption | 2.5 W max. (at max. DC load with all indicators lit) |
Ambient temperature | Operating: -10 to 55°C (with no condensation or icing) Storage: -25 to 65°C (with no condensation or icing) |
Display refresh period | Sampling period (sampling times multiplied by number of averaging times if average processing is selected) |
Max. displayed digits | 5 digits (-19999 to 99999) |
Display | 7-segment digital display, character height: 7.0 mm |
Polarity display | “-” is displayed automatically with a negative input signal |
Zero display | Leading zeros are not displayed |
Scaling function | Programmable with front-panel key inputs (range of display: -19999 to 99999). The decimal point position can be set as desired. |
External controls | HOLD: (measurement value held) |
ZERO: (forced-zero) | |
Hysteresis setting | Programmable with front-panel key inputs (0001 to 9999) |
Other functions | Programmable color display Selectable output operating action Teaching set values Average processing (simple average) Lockout configuration Communications writing control (communications output models only) |
Output | Relays: 2 SPST-NO Transistors: 3 NPN open collector 3 PNP open collector |
Combinations: Communications output (RS-485) + relay outputs Communications output (RS-485) + transistor outputs Communications output (RS-485) + transistor outputs (3 PNP open collector) |
|
Communications | Communications function: RS-485 |
Delay in comparative outputs (transistor outputs) | 750 ms max. |
Degree of protection | Front-panel: NEMA4X for indoor use (equivalent to IP66) Rear case: IEC standard IP20 Terminals: IEC standard IP20 |
Memory protection | Non-volatile memory (EEPROM) (possible to rewrite 100,000 times) |
Size in mm (HxWxD) | 24x48x80 |