Корзина пуста
Датчики расхода воздуха серии D6FZ-FGS1000
Определяет утечки трубопроводе сжатого воздуха
Измеряет утечки, объем потребления и давление воздуха, для оптимизации управление электроэнергией в трубопроводе воздуха. Датчики расхода воздуха серии D6FZ-FGS1000 отображают невидимый раньше расход электроэнергии в системе сжатого воздуха и оптимизирует работу службы главного энергетика
- Высокоточные измерения расхода воздуха
- Определение утечек, измерение используемого объема, давления и температуры с помощью одного уникального прибора
- 2 аналоговых и 2 импульсных выхода
- Интерфейс RS485
- Высокая степень защиты: IP64
- Устанавливается на изогнутую трубу или соединитель
- Индикатор срабатывания
- Пороговое значение (пиковое/минимальное/утечка)
- Удержание тревожного сигнала
Характеристики
Units
| Appearance | Product name | Order code |
|---|---|---|
 |
Air flow sensor (200L type) |
D6FZ-FGT200 |
 |
Air flow sensor (500L type) |
D6FZ-FGT500 |
 |
Air flow sensor (1000L type, cable length: 0.2 m) |
D6FZ-FGS1000 |
 |
Air flow station (Cable length 1.5 m, including T-branch connector cable) |
D6FZ-FGX21 |
 |
Air flow sensor set (1000L type) Air flow sensor (1000L type) Air flow station T-branch connector Single-end wire cable (3 m) |
D6FZ-FGS1000-S |
Accessories (sold separately)
| Appearance | Product name | Order code | ||
|---|---|---|---|---|
 |
T-branch connector | D6FZ-FC02 | ||
 |
(Air flow sensor D6FZ-FGT only) Mounting bracket Mounting bracket: 1 Plus screw (M3): 4 |
D6FZ-FC03 | ||
 |
(Air flow station D6FZ-FGX21 only) Mounting magnet Mounting magnet: 2 Plus screw (M3): 2 |
ZN9-EM01-S | ||
 |
Single-end wire cable | Cable length 3 m | M12 connector (8 pin) |
D6FZ-JD3A |
| Cable length 10 m | D6FZ-JD10A | |||
| Cable length 20 m | D6FZ-JD20A | |||
 |
Double-end connector cable | Cable length 3 m | M12 connector (8 pin) |
D6FZ-JD3B |
| Cable length 5 m | D6FZ-JD5B | |||
| Cable length 10 m | D6FZ-JD10B | |||
| Cable length 20 m | D6FZ-JD20B | |||
Характеристики
Air flow sensor
| Item | Model | D6FZ-FGT200 | D6FZ-FGT500 | |
|---|---|---|---|---|
| Applicable fluid | Air, nitrogen (N2) | |||
| Working pressure | 0.75 MPa (withstands pressure of 1.5MPa) | |||
| Measurement range | 0 to 200 L/min | 0 to 500 L/min | ||
| Accuracy | ±2.0%F.S. at 50 L/min or more | |||
| ±0.5%F.S. at less than 50 L/min | ||||
| Pressure loss | 2 kPa max. | 4 kPa max. | ||
| Power supply voltage | 12 to 24 VDC ±10% ripple (p-p) 10% max. | |||
| Current consumption | 120 mA max. | |||
| Functions | Momentary flow/integrated flow/reversing display/zero point adjustment/peak and bottom hold/key lock/eco model/scaling (analog output)/judgement hysteresis/teaching | |||
| Output | Output interface | Analog | Current output 4 to 20 mA (1 contact), maximum load resistance 300Ω max. | |
| ON/OFF | Open collector output (2 outputs) 26.4 VDC 50 mA max. ON residual voltage 2 V max. (Outputs can be selected from judgement output, pulse output and unit error output) |
|||
| RS-485 | 2-wire half duplex communication, start-stop synchronized method Baud rate: 9.6k/19.2k/38.4k/115.2kbps, data bit length: 7/8bit, stop bit length: 1/2bit, parity: none/even/odd, termination resister (120Ω): ON/OFF, communications protocol: compatible with CompoWay/F |
|||
| Output values | Momentary flow, integrated flow, judgement output, unit error output | |||
| Connection bore diameter | Rc1/4 (8 A) | Rc1/2 (15 A) | ||
| Dimensions | 30(W) x 77(D) x 63.7(H) mm | |||
| Weight (when packaged) | Approx. 400 g (500 g) | |||
| Item | Model | D6FZ-FGS1000 | |
|---|---|---|---|
| Applicable fluid | Air, nitrogen (N2) | ||
| Working pressure | 0.99 MPa max. | ||
| Measurement | Flow | Detection range | 1 to 1,000 L/min (std) |
| Resolution | 0.1 L/min | ||
| Accuracy | ±2.0% of reading at 50 L/min (std) or more | ||
| ±0.1%F.S. at less than 50 L/min | |||
| Pressure | Detection range | 0 to 0.99 MPa | |
| Accuracy | ±2%F.S. | ||
| Temperature | Detection range | -10 to 60°C | |
| Accuracy | ±1.5% (absolute temperature) | ||
| Pressure loss | Direct piping:10 kPa max. (0.5 MPa, at maximum flow) Using coupler (TL type by NAGAHORI INDUSTRY CO., LTD.): 10 kPa max. (0.5 MPa, at maximum flow) |
||
| Power supply voltage | 16 to 24 VDC ±10% ripple (p-p) 10% max. (Using single unit), 24 VDC ±10% ripple (p-p) 10% max. (Using multiple units) |
||
| Power consumption | 2 W max. | ||
| Output | Output interface |
Analog | Current output 4 to 20 mA (2 contact) Max. load resistance 270Ωmax. |
| ON/OFF | Open drain output (2 outputs) 24 VDC 50mA max.
ON residual voltage 1.5 V max., OFF leakage current 50 µA max. |
||
| RS-485 | 2-wire half duplex communication, start-stop synchronized method Baud rate: 115.2 kbps (fixed), Data bit length: 8 bits (fixed), stop bit length: 1 bit (fixed), parity: even (fixed), communications protocol: compatible with CompoWay/F |
||
| Outpus values | Momentary standard flow, integrated standard flow, pressure, unit error output | ||
| Wiring connection | M12 connector (8-pin) | ||
| Connection bore diameter | Rc1 (25 A) bushing enables conversion to 15 A and 20 A | ||
| Dimensions | 64(W) x 93(D) x 195(H) mm (excluding flange) | ||
| Weight (when packaged) | Approx. 1.2 kg (Approx. 1.7 kg) | ||
В этой категории нет товаров
