Корзина пуста
Измерительные датчики Omron ZG2
ZG2 служит для точного измерения формы объектов со сложным рельефом поверхности, выполненных из материалов, затрудняющих измерение. Простой в работе, интуитивно понятный интерфейс пользователя упрощает монтаж, настройку и эксплуатацию прибора. Встроенный ЖК-экран отображает результаты измерения в реальном времени.
- Простота эксплуатации: интуитивно понятный интерфейс пользователя
- Информативность: встроенный ЖК-экран для настройки и мгновенного отображения профиля
- Универсальность: 18 режимов измерения
- Точность: разрешение 5 мкм (3 мм / 631 точек)
- Широкий обзор: до 70 мм
Заказная информация
Sensor heads
| Optical method | Sensing distance | Resolution | Order code | ||
|---|---|---|---|---|---|
| Height direction | Width direction | Height direction | Width direction | ||
| Diffuse reflective | 210±48 mm | 70 mm | 6 µm | 111 µm | ZG2-WDS70 |
| Diffuse reflective | 100±12 mm | 22 mm | 2.5 µm | 35 µm | ZG2-WDS22 |
| Diffuse reflective | 50±3 mm | 8 mm | 1 µm | 13 µm | ZG2-WDS8T |
| Regular reflective | 22.3±0.5 mm | 3 mm | 0.25 µm | 5 µm | ZG2-WDS3VT |
Sensor controllers
| Power supply | Output type | Order code |
|---|---|---|
| 24 VDC | NPN | ZG2-WDC11A |
| PNP | ZG2-WDC41A |
Accessories (order separately)
Real-time parallel output unit
| Output type | Order code |
|---|---|
| NPN | ZG-RPD11 |
| PNP | ZG-RPD41 |
RS-232C cable
| Connecting device | Order code |
|---|---|
| For personal computer connection (2 m) | ZS-XRS2 |
| For PLC/PT connection (2 m) | ZS-XPT2 |
Sensor head extension cable
| Name | Order code |
|---|---|
| 3 m extension cable | ZG2-XC3CR |
| 8 m extension cable | ZG2-XC8CR |
| 15 m extension cable | ZG2-XC15CR |
| 25 m extension cable | ZG2-XC25CR |
| Digital equalizer (relay device) | ZG2-XEQ |
| 0.2 m digital equalizer connection cable | ZG2-XC02D |
Parallel mounting adaptor
| Order code | |
|---|---|
| For 1 unit | ZS-XPM1 |
| For 2 units or more | ZS-XPM2 |
Controller link unit
| Item | Order code | |
|---|---|---|
| Controller link unit | ZS-XCN | |
Memory card
| Capacity | Order code | |
|---|---|---|
| 128 MB | F160-N1285 | |
| 256 MB | F160-N2565 | |
Характеристики
Sensor heads
| Item | ZG2-WDS70 | ZG2-WDS22 | ZG2-WDS8T | ZG2-WDS3VT | ||||
|---|---|---|---|---|---|---|---|---|
| Optical system | Diffuse reflective | Diffuse reflective | Regularreflective | Diffuse reflective | Regularreflective | Regularreflective | Diffuse reflective | |
| Measurement range | Height direction | 210±48 mm (In the high-precision mode) |
100±12 mm | 94±10 mm | 50±3 mm | 44±2 mm | 22.3±0.5 mm | 10.6±0.4 mm |
| Width direction (typical) | 70 mm | 22 mm | 8 mm | 3 mm | ||||
| Resolution | Height direction | 6 µm | 2.5 µm | 1 µm | 0.25 µm | |||
| Width direction | 111 µm (70 mm/631 pixels) |
35 µm (22 mm/631 pixels) |
13 µm (8 mm/631 pixels) |
5 µm (3 mm/631 pixels) |
||||
| Linearity (in the height direction) | ±0.1% F.S. | |||||||
| Temperature characteristic | 0.02% F.S./°C | 0.03% F.S./°C | 0.08% F.S./°C | |||||
| Light source | Type | Visible semiconductor laser | ||||||
| Wavelength | 658 nm | 650 nm | ||||||
| Output | 5 mW max. output, 1 mW max. exposure (without using optical instruments) | 1 mW max. | ||||||
| Laser class | Class 2M of EN60825-1 / IEC60825-1 Class IIIB of FDA (21CFR 1040.10 and 1040.11) |
Class 2 of EN60825-1 / IEC60825-1 Class II of FDA (21CFR 1040.10 and 1040.11) |
||||||
| Beam shape (at measurement center distance) | 120 µm x 75 mm (typical) | 60 µm x 45 mm (typical) | 30 µm x 24 mm (typical) | 25 µm x 4 mm (typical) | ||||
| LED | STANDBY: Lights when laser irradiation preparation is complete (indication color: green) | |||||||
| LD_ON: Lights when the laser is irradiating (indication color: green) | ||||||||
| Measurement object | Surface of non-transparent objects | Surface of non-transparent/transparent objects | ||||||
| Environmental resistance | Ambient light intensity | Illumination on the photo-receiving face 7,000 lx max.: Incandescent lamp | ||||||
| Ambient temperature | Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) | |||||||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |||||||
| Degree of protection | IP66 (IEC60529) | IP67 (IEC60529) | ||||||
| Vibration resistance (destruction) | 10 to 150 Hz with 0.35 mm single amplitude for 80 min each in X, Y, and Z directions | |||||||
| Shock resistance (destruction) | 150 m/s², 3 times each in 6 directions (up / down, right / left, forward / backward) | |||||||
| Materials | Case: Aluminum diecast, Front cover: Glass, Cable insulation: Heat-resistive polyvinyl chloride (PVC), Connector: Zinc alloy or brass |
|||||||
| Cable length | 0.5 m, 2 m (flexible cable) | |||||||
| Weight | Approx. 650 g | Approx. 500 g | Approx. 300 g | |||||
| Accessories | Laser labels (EN: 2 labels, FDA: 3 labels), Ferrite core (1), Instruction manual | |||||||
Sensor controllers
| Item | ZG2-WDC11/WDC11A | ZG2-WDC41/WDC41A | ||
|---|---|---|---|---|
| Input/output type | NPN | PNP | ||
| No. of connectable Sensor Heads | 1 per Controller | |||
| No. of connectable Controllers | 2 | |||
| Measurement cycle | 16 ms (high-precision mode), 8 ms (standard mode), 5 ms (high-speed mode) | |||
| Min. display unit | 10 nm | |||
| Display range | -999.99999 to 999.99999 | |||
| Display | LCD monitor | 1.8-inch TFT color LCD (557x234 pixels) | ||
| LEDs |
|
|||
| External interface | Input/output signal lines |
Analog outputs | Select voltage or current (using the sliding switch on the bottom surface)
|
|
| Judgment output (ALL-PASSING/ERROR) |
NPN open collector 30 VDC, 50 mA max. Residual voltage: 1.2 V max. |
PNP open collector 50 mA max. Residual voltage: 1.2 V max. |
||
| Trigger auxiliary output (ENABLE/GATE) |
||||
| Laser stop input (LD-OFF) | ON: O V short or 1.5 V max. OFF: Open (leakage current: 0.1 mA max.) |
ON: Power supply voltage short or power supply voltage -1.5 V max. OFF: Open (leakage current: 0.1 mA max.) |
||
| Zero reset input (ZERO) | ||||
| Measurement trigger input (TRIG) | ||||
| Bank switching input (BANK A, B) | ||||
| Serial I/O | USB2.0 | 1 port, full speed (12 Mbps), MINI-B | ||
| RS-232C | 1 port, 115,200 bps max. | |||
| Parall output | Output | 18 - terminal | ||
| Main functions | No. of settings banks | 16 | ||
| Sensitivity adjustment | Multi, High-speed multi, Auto, Fixed | |||
| Measurement items | Height, 2-point Step, 3-point Step, Edge position, Edge width, Angle, Intersection coordinates, Intersection angle, Sectional area (up to eight items can be measured simultaneously) |
|||
| Auxiliary functions | Filter, Laser power adjustment, Position correction (height, position, lope), Linked operation, Point of inflection measurement | |||
| Profiles saved | 16 profiles (1 profile per bank) | |||
| Trigger modes | External trigger/continuous | |||
| Ratings | Power supply voltage | 21.6 to 26.4 VDC (including ripple current) | ||
| Current consumption | 0.8 A max. (per sensor head) | |||
| Insulation resistance | 20 MΩ at 250 V between lead wires and Controller case | |||
| Dielectric strength | 1,000 VAC, 50 / 60 Hz for 1 min between lead wires and Controller case | |||
| Environmental resistance | Ambient temperature | Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) | ||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |||
| Degree of protection | IP20 (IEC 60529) | |||
| Vibration resistance (destruction) | Vibration frequency: 10 to 150 Hz, single amplitude: 0.35 mm, acceleration: 50 m/s² | |||
| Shock resistance (destruction) | 150 m/s², 3 times each in 6 directions (up/down, right/left, forward/backward) | |||
| Material | Case: Polycarbonate (PC), Cable insulation: Heat-resistive polyvinyl chloride (PCV) |
|||
| Cable length | 2 m | |||
| Weight | Approx. 300 g (including cable) (Packed state: Approx. 450 g) | |||
| Accessories | ZG2-WDC_1: Large Ferrite Core (1 piece), Instruction Manual ZG2-WDC_1A: Large Ferrite Core (1 piece), Small Ferrite Core (2 pieces), Instruction Manual, Setup Support Software (CD-ROM), USB cable (1 m) |
|||
Data storage unit
| Item | ZG2-DSU11 | ZG2-DSU41 | ||
|---|---|---|---|---|
| Input/output type | NPN | PNP | ||
| No. of connectable Controllers | 2 | |||
| Connectable controllers | ZG2-WDC11/WDC41 | |||
| External interface | Input/output signal lines |
Inputting starting/ terminating logging |
ON: O V short or 1.5 V max. OFF: Open (leakage current: 0.1 mA max.) |
ON: Power supply voltage short or power supply voltage -1.5 V max. OFF: Open (leakage current: 0.1 mA max.) |
| Judgment output (HIGH/PASS/LOW/ERROR) |
NPN open collector 30 VDC, 50 mA max. Residual voltage: 1.2 V max. |
PNP open collector 50 mA max. Residual voltage: 1.2 V max. |
||
| Serial I/O | USB2.0 | 1 port, full speed (12 Mbps), MINI-B | ||
| RS-232C | 1 port, 115,200 bps max. | |||
| Functions | No. of logged data | Memory of the main unit | Profiles saved: 5,120 profiles Measurement values saved: 65,000 values max. |
|
| Memory card (256 MB) | Profiles saved: 35,328 profiles max. (256 profiles x 138 files) Measurement values saved: 7,150,000 values max. (65,000 values x 110 files) |
|||
| Logging trigger functions | External triggers, data triggers (self-triggers), and time triggers | |||
| External banks functions | 4096 | |||
| Other functions | Alarm output functions | |||
| Ratings | Power supply voltage | 21.6 to 26.4 VDC (including ripple current) | ||
| Current consumption | 0.5 A max. | |||
| Environmental resistance | Ambient temperature | Operating: 0 to 50°C, Storage: 0 to 60°C (with no icing or condensation) | ||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |||
| Material | Case: Polycarbonate (PC) | |||
| Cable length | 2 m | |||
| Weight | Approx. 280 g | |||
| Accessories | Ferrite Core (1 piece), Instruction Manual | |||
