Измерительные датчики Omron ZX-E
Датчик ZX-E - это наилучшее решение для задач точного измерения при работе с объектами из металла. Он предназначен для эксплуатации в исключительно жестких условиях, характерных, например, для автомобильной и металлообрабатывающей промышленности.
- Высокое разрешение 1 мкм
- Время реакции всего 150 мкс
- Простая смена головки датчика
- Модульная концепция объединения различных технологий измерения в единую платформу
- Простая регулировка для достижения линейности при работе с объектами из различных металлов
Заказная информация
Sensors
Sensor heads
| Shape | Dimensions | Sensing distance | Resolution | Order code |
|---|---|---|---|---|
| Cylindrical | 3 dia. x 18 mm | 0.5 mm | 1 μm | ZX-EDR5T |
| 5.4 dia. x 18 mm | 1 mm | ZX-ED01T | ||
| 8 dia. x 22 mm | 2 mm | ZX-ED02T | ||
| Screw-shaped | M10x22 mm | 2 mm | ZX-EM02T | |
| M18x46.3 mm | 7 mm | ZX-EM07MT | ||
| Flat | 30x14x4.8 mm | 4 mm | ZX-EV04T | |
| Heat-resistant, cylindrical | M12x22 mm | 2 mm | ZX-EM02HT |
Amplifier units
| Power supply | Output type | Order code |
|---|---|---|
| DC | NPN | ZX-EDA11 |
| PNP | ZX-EDA41 |
Аксессуары
Calculating unit
| Model | |
|---|---|
| Calculating unit | ZX-CAL2 |
Amplifier mounting brackets
| Remarks | Model |
|---|---|
| Attached to each sensor head | ZX-XBE1 |
| For DIN track mounting | ZX-XBE2 |
SmartMonitor sensor setup tool for Personal Computer connection
| Name | Model |
|---|---|
| ZX-series communications interface unit | ZX-SF11 |
| ZX-series communications interface unit + setup software (CD-ROM) |
ZX-SFW11EV3 |
| ZX-series sensor setup and logging software (CD-ROM) | ZX-SW11EV3 |
Cables with connectors on both ends (for extension)
| Cable length | Model |
|---|---|
| 1 m | ZX-XC1A |
| 4 m | ZX-XC4A |
| 8 m | ZX-XC8A |
Характеристики
Sensor heads
| Item | ZX-EDR5T | ZX-ED01T | ZX-ED02T/EM02T | ZX-EM07MT | ZX-EV04T | ZX-EM02HT | ||
|---|---|---|---|---|---|---|---|---|
| Measurement range | 0 to 0.5 mm | 0 to 1 mm | 0 to 2 mm | 0 to 7 mm | 0 to 4 mm | 0 to 2 mm | ||
| Sensing object | Magnetic metals (Measurement ranges and linearities are different for non-magnetic metals. Refer to engineering data on B-67.) |
|||||||
| Standard reference object | 18 x 18 x 3 mm | 30 x 30 x 3 mm | 60 x 60 x 3 mm | 45 x 45 x 3 mm | ||||
| Material: Ferrous (S50C) | ||||||||
| Resolution | 1 µm | |||||||
| Linearity | ±0.5% F.S. | ±1% F.S. | ||||||
| Linear output range | Same as measurement range. | |||||||
| Temperature characteristic (including amplifier unit) |
0.15% F.S./°C | 0.07% F.S./°C | 0.1% F.S./°C | |||||
| Ambient temperature | Operating | 0 to 50°C (with no icing or condensation) | -10 to 60°C (with no icing or condensation) | -10 to 200°C | ||||
| Storage | -20 to 70°C (with no icing or condensation) | -20 to 200°C | ||||||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |||||||
| Insulation resistance | 50 MΩ min. (at 500 DC) | |||||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min between charged parts and case | |||||||
| Vibration resistance (destruction) | 10 to 55 Hz with 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | |||||||
| Shock resistance (destruction) | 500 m/s2, 3 times each in X, Y, and Z directions | |||||||
| Degree of protection (sensor head) | IEC60529, IP65 | IEC60529, IP67 | IEC60529, IP60 | |||||
| Connection method | Connector relay (standard cable length: 2 m) | |||||||
| Weight (packed state) | Approx. 120 g | Approx. 140 g | Approx. 160 g | Approx. 130 g | Approx. 160 g | |||
| Materials | Sensor head | Case | Brass | Stainless steel | Brass | Zinc (nickel-plated) | Brass | |
| Sensing surface | Heat-resistant ABS | PEEK | ||||||
| Preamplifier | PES | |||||||
| Accessories | Amplifier mounting brackets (ZX-XBE1), instruction manual | |||||||
Amplifier units
| Item | ZX-EDA11 | ZX-EDA41 |
|---|---|---|
| Measurement period | 150 µs | |
| Possible average count settings | 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096 | |
| Linear output | Current output: 4 to 20 mA/F.S., max. load resistance: 300 Ω Voltage output: ±4 V (±5 V, 1 to 5 V ), output impedance: 100 Ω |
|
| Judgement outputs (3 outputs: HIGH/PASS/LOW) |
NPN open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 1.2 V max. |
PNP open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 2 V max. |
| Zero reset input, timing input, reset input, judgement output hold input | ON: Short-circuited with 0-V terminal or 1.5 V or less OFF: Open (leakage current: 0.1 mA max.) |
ON: Supply voltage short-circuited or supply voltage within 1.5 V OFF: Open (leakage current: 0.1 mA max.) |
| Function |
|
|
| Indications | Judgement indicators: High (orange), pass (green), low (yellow), 7-segment main digital display (red), 7-segment sub-digital display (yellow), power ON (green), zero reset (green), enable (green) |
|
| Voltage influence (including sensor) |
0.5% F.S. of linear output value at ±20% of power supply voltage | |
| Power supply voltage | 12 to 24 VDC±10%, ripple (p-p): 10% max. | |
| Current consumption | 140 mA max. with power supply voltage of 24 VDC (with sensor connected) | |
| Ambient temperature | Operating and storage: 0 to 50°C (with no icing or condensation) | |
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |
| Insulation resistance | 20 MΩ min. (at 500 DC) | |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | |
| Vibration resistance (destruction) | 10 to 150 Hz with 0.7-mm double amplitude for 80 min each in X, Y, and Z directions | |
| Shock resistance (destruction) | 300 m/s2, 3 times each in 6 directions (up, down, left, right, forward, backward) | |
| Connection method | Prewired (standard cable length: 2 m) | |
| Weight (packed state) | Approx. 350 g | |
| Materials | Case: PBT (polybutylene terephthalate), cover: Polycarbonate | |
| Accessories | Instruction manual | |
