Корзина пуста
Лазерный сканер для систем безопасности Omron OS32C
Для увеличения времени работы автоматически управляемых тележек от аккумуляторных батарей требуются компактные размеры, небольшая масса и низкое потребление энергии устройством. Лазерный сканер OS32C отвечает всем этим требованиям при использовании для предотвращения столкновений и определения наличия препятствий перед машинами и позади них. Выполнение технического обслуживания облегчается за счет вывода точной информации на светодиодный дисплей.
- Лазерный сканер соответствует типу 3 согласно требованиям стандарта IEC61496-1/-3
- 70 комбинаций зон безопасности и зон предупреждения
- Зона безопасности - до 4 м, зона(ы) предупреждения - до 15 м.
- 8 индикаторов отдельных секторов и различные светодиодные индикаторы для отображения состояния устройства
- Функция условной границы предотвращает несанкционированное изменение положения сканера
Заказная информация
| Description | Max. operating range | Order code |
|---|---|---|
| OS32C with back location cable entry | 3 m | OS32C-BP |
| 4 m | OS32C-BP-4M | |
| OS32C with side location cable entry | 3 m | OS32C-SP1 |
| 4 m | OS32C-SP1-4M | |
| OS32C with back location cable entry EtherNet/IP capable for status measurement data reporting |
3 m | OS32C-BP-DM |
| 4 m | OS32C-BP-DM-4M | |
| OS32C with side location cable entry EtherNet/IP capable for status measurement data reporting |
3 m | OS32C-SP1-DM |
| 4 m | OS32C-SP1-DM-4M |
| Description | Remarks | Order code |
|---|---|---|
| Configuration tool | CD-ROM OS supported: Windows 2000, XP, Vista, Windows 7 |
included |
Характеристики
Sensors
| Sensor type | Type 3 safety laser scanner | |
| Safety category | Category 3, performance level d (ISO13849-1: 2006) | |
| Detection capability | Configurable; Non-transparent with a diameter of 30, 40, 50 or 70 mm (1.8% reflectivity or greater) | |
| Monitoring zone | Monitoring zone set count: (Safety zone + 2 warning zones) x 70 sets | |
| Operating range | Safety Zone: 4.0 m (min. obj. resolution of 70mm, only OS32C-_-4M types) 3.0 m (min. obj. resolution of 50 mm or 70 mm) 2.5 m (min. obj. resolution of 40 mm) 1.75 m (min. obj. resolution of 30 mm) Warning Zone: 10.0 m (15.0 m for OS32C-_-4M types) |
|
| Detection angle | 270° | |
| Response time | Response time from ON to OFF: From 80 ms (2 scans) to 680 ms (up to 17 scans) Response time from OFF to ON: Response time from ON to OFF + 100 ms to 60 s (configurable) |
|
| Line voltage | 24 VDC +25%/-30% (ripple p-p 2.5 V max.) | |
| Power consumption | Normal operation: 5 W max., 4 W typical (without output load) Standby mode: 3.75 W (without output load) |
|
| Safety output (OSSD) | PNP transistor x 2, load current of 250mA max., residual voltage of 2 V max., load capacity of 2.2 µf max., leak current of 1 mA max. | |
| Auxiliary output (Non-safety) | NPN/PNP transistor x 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max. | |
| Warning output (Non-safety) | NPN/PNP transistor x 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max. | |
| Output operation mode | Auto start, start interlock, start/restart interlock | |
| Input | External Device Monitoring (EDM) | ON: 0 V short (input current of 50 mA), OFF: Open |
| Start | ON: 0 V short (input current of 20 mA), OFF: Open | |
| Zone select | ON: 24 V short (input current of 5 mA), OFF: Open | |
| Stand-by | ON: 24 V short (input current of 5 mA), OFF: Open | |
| Connection type | Power cable: 18-pin mini-connector (pigtail) Communication cable: M12, 4-pin connector |
|
| Connection with PC | Communication: EtherNet/IP | |
| Indicators | RUN indicator: Green, STOP indicator: Red, Interlock indicator: Yellow, Warning output indicator: Orange, Status/diagnostic display: 2 x 7-segment LEDs, Intrusion indicators: Red LED x 8 |
|
| Enclosure rating | IP65 (IEC60529) | |
| Dimensions (W x H x D) | 133.0 x 104.5 x 142.7 mm (except cable) | |
| Weight (Main Unit only) | 1.3 kg | |
| Approvals | Certified by: TÜV Rheinland, UL Major standards: IEC61496-1/-3 (Type 3), IEC61508 (SIL2), ISO13849-1:2008 (Category 3, performance level d), UL508, UL1998 |
|
Аксессуары (продаются отдельно)
Power cable
| Appearance | Description | Remarks | Order code |
|---|---|---|---|
|
Cable length: 3 m | One cable is required per sensor | OS32C-CBL-03M |
| Cable length: 10 m | OS32C-CBL-10M | ||
| Cable length: 20 m | OS32C-CBL-20M | ||
| Cable length: 30 m | OS32C-CBL-30M |
Ethernet cable
| Appearance | Description | Remarks | Order code |
|---|---|---|---|
|
Cable length: 2 m | Required for configuration and monitoring | OS32C-ECBL-02M |
| Cable length: 5 m | OS32C-ECBL-05M | ||
| Cable length: 15 m | OS32C-ECBL-15M |
Mounting brackets
| Appearance | Description | Remarks | Order code |
|---|---|---|---|
|
Bottom/side mounting bracket | Bottom/side mounting bracket x 1, unit mounting screws x 4 sets |
OS32C-BKT1 |
|
XY axis rotation mounting bracket | XY axis rotation mounting bracket x 1, unit mounting screws x 6 sets, bracket mounting screws x 1 set (must be used with OS32C-BKT1) |
OS32C-BKT2 |
|
Simple mounting bracket | Simple mounting brackets x 2, unit mounting screws x 4 sets |
OS32C-BKT3 |
|
Protective cover for window | OS32C-BKT4 | |
|
Mounting stand | When using a mounting stand, use an OS32C with side location cable entry (OS32C-SP1). The OS32C with back location cable entry (OS32C-BP) cannot be mounted. Use with mounting brackets (OS32C-BKT1 and OS32C-BKT2). |
OS32C-MT |
|
Hardware kit for mounting stand | Mounting screws x 3 sets Use this when mounting a bracket to the mounting stand. |
OS32C-HDT |
Miscellaneous
| Appearance | Description | Remarks | Order code | |
|---|---|---|---|---|
|
Scan window | Spare for replacement | OS32C-WIN-KT | |
|
Sensor block without I/O block Max. operating range: 3 m |
Spare for replacement | OS32C-SN | |
| Sensor block without I/O block Max. operating range: 4 m |
OS32C-SN-4M | |||
|
Sensor block without I/O block for EtherNet/IP Max. operating range: 3 m |
Spare replacement for EtherNet/IP | OS32C-SN-DM | |
| Sensor block without I/O block for EtherNet/IP Max. operating range: 4 m |
OS32C-SN-DM-4M | |||
|
I/O block | With cable access from the back |
Spare for replacement | OS32C-CBBP |
|
With cable access from the left side |
Spare for replacement | OS32C-CBSP1 | |
|
Window cleaning kit, anti-static cleaner | Accessory | WIN-CLN-KT | |
